Gift Premium Subscription To aquenne

Join Date:


Last Activity:

03-18-2015 10:51 PM

Likes Given: 6

5 Likes on 5 Posts 


  • Male
  • Single
  • Paris
  • Ontario


  • Posted in thread: Perlick 525SS, drip trays, demijons on 01-23-2014 at 12:54 AM
    Ill take the faucet. Im in Canada (southern ontario), could you see how much extra it would be
    to ship and ill either pay the difference, or you can ship it to the US border (something like
    CBI) and i...

  • Posted in thread: Massive co2 leak. What is wrong!? on 01-15-2014 at 12:00 AM
    yes that washer wont seal as the face on the regulator will just contact the mating face on the
    tank connector.. the washer wont work. ive never seen a regulator with a connector such as

  • Posted in thread: Need input from HVAC guy on motor on 12-18-2013 at 12:49 AM
    if its a ac motor your probably going to have to look into a gear reducer or a differential
    belt/pulley setup..

  • Posted in thread: Why such concern over pump GPM? on 12-05-2013 at 12:19 AM
    Well, coming from a HERMS system, I want maximum flow to improve the heat transfer. The quicker
    I can recirc the mash, the quicker I can bump temps.

  • Posted in thread: Where to buy Harris Stay-Brite #8 solder in Canada? on 08-10-2013 at 12:38 PM
    again, as long as you get silver bearing plumbing solder (home depot/lowes) you will be fine.
    Just get the right flux

  • Posted in thread: Where to buy Harris Stay-Brite #8 solder in Canada? on 08-09-2013 at 04:32 PM
    If this is to solder stainless, dont worry about it, you can use any silver based solder (home
    depot has some). Whats important is the stay brite liquid flux. I had to buy some over ebay
    (16oz bottle ...

  • Posted in thread: Drink directly from Conical? on 08-09-2013 at 11:40 AM
    Some brew pubs do use serving tanks rather than kegs. But still, very different in design than
    a conical. Just think very large keg with temperature control.

  • Posted in thread: Drink directly from Conical? on 08-08-2013 at 04:20 PM
    Yes, at my little brewery the conical is the bottle neck in the process. It would definitely
    suck if I had to wait until the beer was done to ferment another.Dont worry, transfering from
    conical to ke...

  • Posted in thread: Camco/Love combo? on 07-18-2013 at 12:01 PM
    you could of course use a controller like that (not exactly that one) to output to a
    appropriately sized mechanical relay or solid state relay to switch the element.

  • Posted in thread: ...I think I ruined this... on 06-21-2013 at 12:18 AM
    sorry.. is this a half filled bottle or is that mass of something just suspended in there?