VIEW MY

Anbrand

Gift Premium Subscription To Anbrand

Join Date:

10-25-2010

Last Activity:

12-13-2013 7:13 AM

    ABOUT ME

  • Michigan
  • Male
  • Married

LATEST ACTIVITY

  • Posted in thread: Need a concentrate recommendation on 09-28-2013 at 10:13 PM
    I'm interested in fruit concentrate recommendations to flavor and backsweeten my cider. What
    brands or sources have you had the best results with? What flavors have gone over well?

  • Posted in thread: OG reading is now .998, what is going on?!?! on 11-20-2012 at 02:10 AM
    Ditto on the hydrometer. I recently took a reading that I knew was way off and after examining
    the hydrometer at different angles in good light I discovered a hairline fracture. They are
    fragile..on m...

  • Posted in thread: RIMS Element Advice Needed on 11-06-2012 at 11:27 PM
    Thanks for the input guys. I should be good to go then. I chose to go with the NPT fittings
    style tube with Camlock hose fittings. My Coleman Extreme should prevent any major heat loss in
    windy condit...

  • Posted in thread: RIMS Element Advice Needed on 11-06-2012 at 02:54 AM
    Is a 1500 W 110v element sufficient to maintain mash temperature? I'm only concerned will the
    ability to maintain the temp post dough-in. The tube body is 1 1/2" x 8" (not including the
    tees). I have ...

  • Posted in thread: 120V, 2000W Diagram Review on 10-11-2012 at 01:32 AM
    I'm in the same place as you are. One minor difference that I am planning is to require that
    the pump be powered for the element to be powered. Like you, I am also planning on a separate
    power switche...

  • Posted in thread: Grain Mill Motor on 03-07-2012 at 09:09 PM
    Checking into it more it looks like it's 100:1 reduction - used for feeding stove pellets. My
    bad. Back to the drill.

  • Posted in thread: Grain Mill Motor on 03-07-2012 at 06:13 PM
    The 1.6 should read 160. It appears to be a misprint. I already have a corded DeWalt but I'd
    rather have a dedicated motor.

  • Posted in thread: Grain Mill Motor on 03-07-2012 at 05:34 PM
    I'm looking to motorize my new BC mill and have been looking at different alternatives. While
    searching I came across some inexpensive DC gear motor's that appear to have the required
    specifications. ...

  • Posted in thread: Any thoughts on Procon Pumps? on 02-28-2012 at 05:12 AM
    FYI

  • Posted in thread: Yeast Questions on 12-19-2011 at 10:10 PM
    I spashed the wort around pretty good when transferring to the primaries. There was a good
    amount of foam on the surface. Yes, I've learned the fermentation lesson first hand. I once
    bought a bucket t...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS