VIEW MY

aludwig

Gift Premium Subscription To aludwig

Join Date:

07-16-2010

Last Activity:

10-25-2014 4:08 PM

5 Likes on 5 Posts 

    ABOUT ME

  • Is there anything besides
    brewing???
  • Boring
  • Aaron
  • Nothing. Spending every dime on this control panel...
  • Male
  • Married
  • Warrenton
  • Virginia

LATEST ACTIVITY

  • Posted in thread: Basement Brew Sink : What kind of drain pump? on 12-07-2013 at 09:25 AM
    I was thinking about installing one of the larger ones and building out a basement restroom at
    the same time. But that will be a couple grand all together (and therefore isn't going to
    happen any time...

  • Posted in thread: Understanding brewpub apparatus on 12-07-2013 at 09:13 AM
    The aforementioned book, "Brewery Operations Manual" is a good resource.It doesn't go into
    great depth on equipment, but there is a fairly good outline of what equipment a brewpub uses
    and what it's f...

  • Posted in thread: too much post-boil volume on 09-02-2013 at 07:07 PM
    In the future, if you have too much wort at the beginning of the boil, just boil off some
    before adding your hops. For instance you can do a 90 min boil, adding the hops after the first
    30 min.As for ...

  • Posted in thread: Aging lager on 08-30-2013 at 04:39 PM
    According to Noonan's book, aging is typically done close to freezing, so I would go with the
    refrigerator.

  • Posted in thread: ssr help please on 07-19-2013 at 06:59 PM
    That will work fine. The hot plate should only pull around 10 amps (1100/120), unless I am
    mistaken. Just make sure the trigger side is the right voltage range for your
    controller/switch.

  • Posted in thread: Dimensions of 3 Piece Airlock? on 03-02-2013 at 11:22 PM
    Good point. This stopper (currently out of stock at morebeer) looks like it is just the size of
    a regular stopper. I bet it sticks out of the carboy by a 1/4" or so.

  • Posted in thread: Dimensions of 3 Piece Airlock? on 03-02-2013 at 10:36 PM
    Overall height is 4-5/8" (including the cap), 1-5/8" of that is the stem, the reservoir is
    3".Note: I also measured the one that is currently in my carboy and the top of the cap is about
    3-1/4" higher...

  • Posted in thread: 1BBL Stainless Single Tier on 03-02-2013 at 09:25 AM
    Sorry for digging up an old thread, but do you have pictures, or can you talk about the
    whirlpool a little? (Nice build, BTW) I'm building a 1 BBL system and i'm worried about being
    able to get that m...

  • Posted in thread: Lager Starter on 02-25-2013 at 12:38 PM
    I wish I read this earlier. I made a 2L starter with WLP830 (German Lager). My plan was to let
    it go for 24-30 hours then cold crash overnight, decant and top up with another 2l fresh wort
    and let tha...

  • Posted in thread: Did I go overboard with equipment?? on 02-22-2013 at 09:27 AM
    "won't have to buy anything else later" is what you tell your significant other. Welcome to the
    hobby (and forum). I don't think you will regret getting the equipment you wanted up front, but
    don't ki...

0 COMMENTS
POST A COMMENT