Alefebvre

Gift Premium Subscription To Alefebvre

Join Date:

03-14-2011

Last Activity:

08-26-2013 9:12 AM

    ABOUT ME

  • Single
  • Ottawa
  • ON

LATEST ACTIVITY

  • Posted in thread: Fermentation Chamber Heater Too Powerful? on 02-25-2013 at 07:58 PM
    60w incandescent light bulb covered with ceramic beer mug. Works perfect I live in Canada and
    temps get below -30c and that light bulb will keep my ferm temps no prob.

  • Posted in thread: Electrical short in control panel! on 02-20-2013 at 10:26 PM
    Do you think it has something to do with this? (See picture below) I have 3 wires (Neutral,
    Hot, Hot) coming into the switch and only 2 wires (Hot, Hot) coming out.As you can see the red
    wire on the l...

  • Posted in thread: Electrical short in control panel! on 02-20-2013 at 10:06 PM
    Crane,You seem to have a good point here in your first statement. The switch i am using is a
    cheap one i got off ebay and before I got the change to install it in my panel I took it apart
    and maybe I ...

  • Posted in thread: Electrical short in control panel! on 02-20-2013 at 02:23 AM
    Ya I guess i'll have to look into getting a multi meter. And I think I just gonna have to
    rewire the whole thing in a bigger control panel everything is kinda crammed into the one I
    currently have and...

  • Posted in thread: 5500W Heat Element to LED on 02-20-2013 at 02:07 AM
    Alright I figured it out you had it right nm999 thanks for the help.

  • Posted in thread: Electrical short in control panel! on 02-20-2013 at 01:33 AM
    Ok so I'm gonna try to describe this as best as I can and hopefully someone can shine some
    light on this mystery.Systam setup:I've attached the schematic of the wiring system I am using.
    Basically the...

  • Posted in thread: 5500W Heat Element to LED on 02-19-2013 at 05:27 PM
    I have just one more question hopefully someone can help. I got my switch today for this
    diagram. I went with a DPST illuminated 15/30a 250v (KCD4). How would I wire this up?Incase you
    can't see the w...

  • Posted in thread: 5500W Heat Element to LED on 02-19-2013 at 01:08 PM
    Alright thanks P-J! And that's for the wiring diagram :mug:

  • Posted in thread: 5500W Heat Element to LED on 02-19-2013 at 01:05 PM
    Would it be better to wire the light I have in parallel?

  • Posted in thread: 5500W Heat Element to LED on 02-19-2013 at 12:49 PM
    I'd really just like to keep the setup like I have defined in the diagram as I already have all
    the parts. I'm just mainly concerned with the 220v light leeching any power that would be going
    to my he...

Following Stats
0 COMMENTS
POST A COMMENT