Last Activity:10-18-2014 9:49 AM
Likes Given: 1
Posted in thread: Buying Beer in OH on 10-29-2011 at 10:24 PM
Take a trip back to PA for the holidays to restock
Posted in thread: [B]AG System Selection Help[/B] on 09-14-2011 at 08:10 PM
I started all grain about 3 years ago. Spent quite a bit of money continuously upgrading the
system and was producing some nice beers. I recently had a baby and time was a problem. Decided
to do BIAB ...
Posted in thread: Bottling wand for Perlick 525/75, AKA Bowie Bottler on 03-29-2011 at 11:14 PM
I'll Take two. Thank you
Posted in thread: 60 qt. stainless pot $130 bucks on 02-01-2011 at 11:35 PM
Overstock.com has a 60 qt. stainless pot with steamer basket for 130.99. It sais commercial
grade and it's 1.5mm thick. Just wanted to pass along the info. It looks like a hell of a deal.
Posted in thread: New AG'r - No Sparge Guidance pls on 01-29-2011 at 12:45 AM
stick with the BIAB you originally wanted to do. I average 83% to the kettle to the "T" every
time. I feel its all in the crush. I double crush and stir occasionally during the mash and
then do a mash...
Posted in thread: DIY SS Kettle on 12-23-2010 at 03:44 PM
Just checked out your brewstand. Not sure the diameter of a 55 gallon pot, but could you not
weld some supports to your brewstand to accomodate the 55 gallon pot
Posted in thread: Any drawbacks to mashing with total pre-boil volume using MLT?? on 12-22-2010 at 05:41 PM
yeah my double crush is very fine. Not all powder but crushed fine, and I am using a grain bag.
Posted in thread: Any drawbacks to mashing with total pre-boil volume using MLT?? on 12-22-2010 at 05:05 PM
I have been no-sparge brewing for the last 6 brews, I do a double crush and mash out and have
been averaging 83% to the kettle. I ask to all the brewers who say you lose efficiency, Have
you ever trie...
Posted in thread: DIY SS Kettle on 12-21-2010 at 07:03 PM
My Dad fabricated me a kettle. It's a 16 gallon one. In my gallery there is a pic of it. It's
the kettle on the far right. I added handles to it for lifting. So yes it's able to be done if
you can fab...