VIEW MY

adamant

Gift Premium Subscription To adamant

Join Date:

05-12-2011

Last Activity:

08-15-2014 1:32 PM

    ABOUT ME

  • Single
  • Columbus
  • Oh

LATEST ACTIVITY

  • Posted in thread: My Weldless Build Using Strut on 01-08-2014 at 05:33 PM
    I still haven't read all this yet, but wanted to ask this to see if it's been done. I'm leaning
    heavily on strut over a welded stand. Brutus 10 style but with storage for the keggles under
    similar to ...

  • Posted in thread: My Weldless Build Using Strut on 01-06-2014 at 01:07 PM
    Look for an electrical supplier in your area. I picked up 6 10' galvanized lengths for $85.00
    from a local electrical contractor supply house when I built my new stand. All of the fittings
    came from w...

  • Posted in thread: McMaster Keg O-Ring List on 12-20-2013 at 12:27 PM
    Homebrewfinds.com did a post with links recently.

  • Posted in thread: My Weldless Build Using Strut on 11-20-2013 at 01:48 PM
    Picked up my strut today, and I'm about to order my fittings. FYI there is a coupon code for
    strutchannelfittings.com "SAVE" for 10% off.I was planning on going for a 2 tier system, but
    looking at the...

  • Posted in thread: Single tier brewstand design and build (stores keggles inside) on 10-07-2013 at 02:12 PM
    Someone had a similar build (with keggle storage). They painted it blue and had a removable PID
    control panel. Can someone help me find the link?

  • Posted in thread: My Weldless Build Using Strut on 10-04-2013 at 04:32 PM
    Menards has some urethane powder coated strut channel (green only). How well does that hold up
    to heat?

  • Posted in thread: understanding high pressure versus low pressure propane on 06-30-2013 at 07:25 PM
    Thanks. I appreciate the insight. It would be cool if there were adjustable orifices, but
    swapping out a $7 part is pretty reasonable.

  • Posted in thread: understanding high pressure versus low pressure propane on 06-29-2013 at 08:35 PM
    The LP valves have a nominal 3/32" opening, and the NG valves have a larger nominal 1/8"
    opening.hmm, how much performance reduction is there if you used LP with an NG orifice or NG
    with an LP orifice...

  • Posted in thread: understanding high pressure versus low pressure propane on 06-28-2013 at 04:30 PM
    I would do a search for 2 stage propane regulators and skip the one you linked, they should be
    much cheaper and available from a RV parts supplier or Lowes. As to the pipe manifold, 1/2"
    iron pipe is ...

  • Posted in thread: understanding high pressure versus low pressure propane on 06-27-2013 at 07:02 PM
    Yes and a thermocouple. Look at post #7 in this thread for what's needed.Is there any other
    difference between the 8200 and 8300 other than outlet size? Nevermind, I see this addressed
    above, now.Look...

0 COMMENTS
POST A COMMENT