VIEW MY

a1lawng

Gift Premium Subscription To a1lawng

Join Date:

02-02-2011

Last Activity:

12-25-2014 9:50 PM

2 Likes on 2 Posts 

    ABOUT ME

  • Male
  • Married
  • Weymouth
  • MA

LATEST ACTIVITY

  • Posted in thread: Great Fermentations $100 Gift Certificate giveaway! on 12-03-2014 at 11:23 AM
    In! Cheers.

  • Posted in thread: Kit Upgrades, Keg Deals + Much More: it's Black Friday/Cyber Monday @ Kegconnection! on 11-27-2014 at 12:06 PM
    Count me in. Thanks!

  • Posted in thread: $4.87 keg tool on 11-22-2014 at 02:04 AM
    ...the other coupling I have has thicker walls than the other two I used...@runningweird, did
    you use propane or MAPP gas when you soldered your thicker-walled coupling? I used propane
    yesterday and t...

  • Posted in thread: $4.87 keg tool on 11-17-2014 at 10:00 PM
    ...the other coupling I have has thicker walls than the other two I used, and the force of
    trying to pull it through the dimple cracked both my sections of pvc.Funny you should mention
    this. I just in...

  • Posted in thread: $4.87 keg tool on 11-17-2014 at 08:24 PM
    Nice work.

  • Posted in thread: The SsBrewingTechnologies "Happy HolidaySs" Giveaway! on 11-16-2014 at 04:58 PM
    I'm in!In. Thanks!

  • Posted in thread: $4.87 keg tool on 11-11-2014 at 05:06 PM
    Read through this great thread on soldering stainless...Soldering Stainless steel

  • Posted in thread: $4.87 keg tool on 11-11-2014 at 03:55 PM
    tAny ideas on the solder issue?Are you using the right flux and solder? A lot of people (myself
    included) use Harris Stay-Clean flux and Stay-Brite solder. It's expensive but you might not
    need much. ...

  • Posted in thread: $4.87 keg tool on 11-11-2014 at 12:25 PM
    ...But, after one complete pull through and getting the copper through most of the way on the
    second my bolt threads are deformed to the point I can't even thread the nut. so one bolt per
    hole.... I ...

  • Posted in thread: Co2 regulator gauge query on 11-02-2014 at 02:08 AM
    With my setup, which I think is typical, I just connect the gas line(s) to the keg(s) then turn
    the gas on. Then I adjust the pressure with the adjustment screw/knob on the regulator and if
    the pressu...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS