Last Activity:09-29-2016 12:46 AM
4 Likes on 4 Posts
Posted in thread: Converting to Sanke S-type system on 09-28-2016 at 09:53 AM
When purchasing new Sankey kegs is there anything that needs to be done to them before first
use? Do they need a TSP cleaning or need to be passivated? Or can you just sanitize and begin
Posted in thread: Walk-in cooler build thread on 03-24-2015 at 08:02 PM
Here is the framing completed along with wiring pulled. I decided to do a single cat 5e wire
run for each sensor I anticipate needing. In one area of the cooler I will have a low volt
plate with 3 RJ1...
Posted in thread: BCS Temp probe to Cat5e Help on 03-14-2015 at 12:24 PM
Any ideas how long of a run you can make with the Cat5? I want to do something similar in my
fermentation room and I'd want to use cat 5 wire and connectors between my fermenters and my
Posted in thread: Oxygenation in a 15 gallon fermentor on 03-10-2015 at 01:35 PM
I certainly oxygenate in my conicals. I cannot see any reason to STOP oxygenating once you make
the change. I don't think you are going to get O2 levels where you need/want them otherwise.
Posted in thread: Walk-in cooler build thread on 03-10-2015 at 12:52 PM
I'm usually bad about the "before pictures". Here is what it used to look like and the space
cleaned and ready to begin the build.
Posted in thread: Walk-in cooler build thread on 03-10-2015 at 12:32 PM
Background: I have an unconditioned space, completely sealed and underground. Temperatures hold
pretty steady in the 60's except during the summer months when it can climb into the low 70's.
It has wo...
Posted in thread: Super Simple 15G Plastic Conical on 03-03-2015 at 01:46 PM
Thanks for those links. Every little bit off helps me buy more fittings! I am trying to get my
head around a CIP ball/top connector. I assume I need a weldless bulkhead fitting through the
lid with a ...
Posted in thread: Super Simple 15G Plastic Conical on 02-27-2015 at 10:27 PM
Could those of you who have used the 2x1.5 concentric reducer to go to 2" sight glass comment
on whether you think it was beneficial or if the 1.5" sight glass is sufficient for 15gal
Posted in thread: Super Simple 15G Plastic Conical on 02-25-2015 at 03:02 PM
Forgive me if this was covered in the previous 109 pages, but things start to get fuzzy after a
while. I am looking to typically brew 15 gal batches, but occasionally will want to double
batch and get...
Posted in thread: Eyes on my first Black Rye IPA on 02-18-2015 at 03:52 PM
My wife has become a huge fan of black ipas (thanks Wookey Jack!) and has asked me to start
formulating our own house Black IPA. What are your thoughts on this grist and hop bill?
Wondering if it is t...