Last Activity:06-04-2015 3:36 PM
Likes Given: 1
3 Likes on 3 Posts
Posted in thread: Anyone from Winnipeg out there? on 04-29-2015 at 03:02 PM
Another Jets fan here. I brew all grain, mosty IPAs and wheats. Started about a year ago and
ditched the bottles for a homemade 5 keg keezer.I buy most of my ingredients from Grape and
Grain, and most...
Posted in thread: Pi day on 03-10-2015 at 05:10 PM
31/4/15 (2031/4/15)Edit. Hope to brew.
Posted in thread: High Gravity Brewing vs Brew Boss vs Another Electric Brewing Setup on 02-27-2015 at 04:55 PM
Here is the reply I received from Dave at High Gravity.We rotate the pump head on the motor 90
degrees so that the input is at the low point. With the pump and vessel sitting on the same
surface, the ...
Posted in thread: High Gravity Brewing vs Brew Boss vs Another Electric Brewing Setup on 02-27-2015 at 04:04 PM
I have a quick question about the chugger pump. I thought it has to be below the kettle port,
but the picture on the website shows it on the counter. I see that the flow from the kettle
goes below the...
Posted in thread: Insulated Kettles on 02-24-2015 at 04:34 PM
In short, you want a stovetop BIAB system with a mesh "sleeve" instead of a bag and
recirculating system with option of adding a RIMS tube at a later date. Once you piece it
together, it will end up c...
Posted in thread: Insulated Kettles on 02-24-2015 at 12:25 PM
I guess it sounded a bit confusing, though it made sense when I was writing.When I first saw
the grainfather, it peaked my interest as a somewhat affordable all in one system. I however
didn't like th...
Posted in thread: Insulated Kettles on 02-24-2015 at 02:00 AM
I guess i could cut the bottom of the bigger kettle and slide the other one through. Weld the
seam.I live in Winnipeg. I have winter jackets to spare. I would be worried about the winter
Posted in thread: Insulated Kettles on 02-24-2015 at 01:26 AM
I was definitely not going to insulate the bottom, just the sides. I was thinking of using this
stuff. rating of 1177°C (2150°F).I was also going to include a port for a future heat
element, but for...
Posted in thread: Insulated Kettles on 02-24-2015 at 12:17 AM
Why not? Is there not certain insulation that has a high temp rating? I don't need to use spray
Posted in thread: Insulated Kettles on 02-23-2015 at 09:51 PM
Has anyone ever welded a smaller pot inside a larger pot and insulated between? I have a 15
gallon kettle and 12 gallon kettle. I have a SS welder neighbour who would be able to weld in
some ports for...