Last Activity:12-06-2013 1:26 AM
Posted in thread: Accuflex bev seal ultra tubing problem on 01-19-2013 at 03:52 AM
With that second one, you don't need the beer nut, and mfl adapter? Just replace those two
parts with this one? That's really awesome if so. One of my shanks has a welded on nipple, just
have to cut/g...
Posted in thread: Accuflex bev seal ultra tubing problem on 01-18-2013 at 07:59 AM
I just purchased some John Guest fittings for my keezer last week. I'm not sure why more people
don't use these fittings being that they are designed for this type of tubing. You simply slip
Posted in thread: Motorized Grain Mills: Time to show them off! on 11-01-2011 at 06:58 PM
Update on my 177.7 rpm motor that will not turn clockwise. I called Surplus Center tech
department and reviewed the wiring. I also told him that the motor was warm to touch after
running motor for onl...
Posted in thread: Motorized Grain Mills: Time to show them off! on 11-01-2011 at 04:25 PM
clearwaterbrewer, you are correct. Now that I look at the schematic that I posted (I copied it
from another thread) I see that it is not quite an accurate depiction of what I have. I believe
I have th...
Posted in thread: Motorized Grain Mills: Time to show them off! on 11-01-2011 at 08:25 AM
Maybe someone here can help me with an electrical question. Yesterday I added the 177.7 rpm
motor from surplus center to my barley crusher and added a three-position switch (on-off-on).
When I tested ...
Posted in thread: Can i borrow your step bit? on 10-12-2011 at 06:53 AM
For the price of shipping you could probably get a step-bit at Harbor Freight. Here's a link to
the Harbor Freight webpage with the step-bits.
Posted in thread: Denver CMC group grain buy. on 04-21-2011 at 09:41 AM
Just added my order. Dahoov, I know others have asked this, now it's my turn. I will be out of
town that weekend but will be able to pick it up on Tuesday. Please let me know if this will be
Posted in thread: Cheap & Easy 10 Gallon Rubbermaid MLT Conversion on 03-08-2011 at 04:33 PM
Like jtkratzer said, my washers also fit perfectly into the depression. The washers have an OD
of 1.5" and are about 1/16" thick. I don't think the thickness matters too much other than
getting the va...
Posted in thread: Cheap & Easy 10 Gallon Rubbermaid MLT Conversion on 03-08-2011 at 07:53 AM
I went to Home Depot yesterday and found 5/8" stainless steel washers. It came in a kit called
"Create-A-Bolt" which contains the stainless steel washers along with nuts and lock washers (4