VIEW MY

Rooster81

Gift Premium Subscription To Rooster81

Join Date:

08-08-2012

Last Activity:

02-06-2013 9:01 PM

3 Likes on 3 Posts 

LATEST ACTIVITY

  • Posted in thread: Northern English Brown on 02-07-2013 at 01:31 AM
    I made this one about four weeks ago and it's great! My efficiency was a little better than
    normal so it came out at about 6% ABV. I mashed at about 152 degrees.

  • Posted in thread: BierMuncher's Outer Limits IPA on 08-13-2012 at 01:35 AM
    Made this on July 3, 2012. One of the best beers I've brewed to date. Some slight tweaks:-
    Mashed at 154 degrees- Used two packs of safale 05Original gravity was 1.068, final gravity was
    1.014. I was ...

  • Posted in thread: Simplified Counter Pressure Bottle Filler on 08-09-2012 at 02:53 AM
    You mentioned in your first post that you sometimes fill bottles from a room temp keg. What PSI
    was the keg pressurized at, and what's your foaming like?I should also mention this was the
    first time I...

  • Posted in thread: Simplified Counter Pressure Bottle Filler on 08-09-2012 at 02:51 AM
    You mentioned in your first post that you sometimes fill bottles from a room temp keg. What PSI
    was the keg pressurized at, and what's your foaming like?I'm not sure what the PSI was, I threw
    some sug...

  • Posted in thread: Simplified Counter Pressure Bottle Filler on 08-08-2012 at 09:37 PM
    Simple set up (and love the detailed sketch). I don't see the CO2 tank, so it looks like you're
    pressurizing the keg and using its internal pressure to push the beer out?Yes, I figure for a
    six pack t...

  • Posted in thread: Simplified Counter Pressure Bottle Filler on 08-08-2012 at 08:32 PM
    If I read the drawing correctly, you still vent by releasing the seal on the stopper? I hate
    that part in my current system.Correct. Although if you were filing up a growler or larger
    container and ha...

  • Posted in thread: Bottling day! Am I the only one who enjoys it ? on 08-08-2012 at 05:21 PM
    I think you're the only two.

  • Posted in thread: Simplified Counter Pressure Bottle Filler on 08-08-2012 at 03:30 PM
    Super detailed schematic attached.

  • Posted in thread: Simplified Counter Pressure Bottle Filler on 08-08-2012 at 02:23 PM
    I know, I'm at work right now. I could upload the original sketch I made! :)

  • Posted in thread: Simplified Counter Pressure Bottle Filler on 08-08-2012 at 02:16 PM
    Hey Everyone,I've recently completed a simplied CPBF. The design uses the following
    components:- Roughly 6-8 feet of tubing, 1/4"- Two in line on/off ball valves 3/8" (picked up
    for $7 each at hardwar...

0 COMMENTS
POST A COMMENT