Quaffer

Gift Premium Subscription To Quaffer

Join Date:

12-09-2008

Last Activity:

06-15-2014 4:27 PM

Referrals: 1

Likes Given: 1

24 Likes on 15 Posts 

    ABOUT ME

  • Bah, humbug!
  • Bjorn Jansson
  • Radical Brewing by Randy Mosher
  • Extract and specialty grain brewing since 1994.rnAll grain since 2008.
  • Male
  • Married
  • Snohomish
  • WA

LATEST ACTIVITY

  • Posted in thread: Converting the Frigidaire 7.2 cu ft Chest Freezer on 10-07-2013 at 11:53 PM
    I very carefully drilled holes through the frame into the insulation. Then I took a small
    screwdriver and poked around inside to make sure I would not run into a refrigerant tube. The
    screws are 1" lo...

  • Posted in thread: Converting the Frigidaire 7.2 cu ft Chest Freezer on 11-15-2012 at 03:57 PM
    Wonderful project! I can wait to get started and make one just like yours! Just a quick
    question--can you fit 4 Corny kegs inside your 7.2 cu ft freezer? I was thinking about the
    bigger one to more co...

  • Posted in thread: Converting the Frigidaire 7.2 cu ft Chest Freezer on 10-07-2012 at 09:32 AM
    Quaffer thanks for starting this thread it has given me a lot of ideas. My question is in
    reference to the screws that go into the plastic frame. I was wondering how long they are? I am
    thinking 1/4 i...

  • Posted in thread: Show us your sculpture or brew rig on 03-02-2012 at 04:00 PM
    Beautiful work, Endoquest, especially the plumbing!Is that a flexible hose on the drain of the
    middle keggle?

  • Posted in thread: Converting the Frigidaire 7.2 cu ft Chest Freezer on 02-07-2012 at 03:51 PM
    Kudos to the awesome build, quaffer. I have had an eye on your build for quite a while now. I
    finally bought a keg system a couple weeks ago. I bought a 7.2 chest freezer yesterday :) I
    plan modeling ...

  • Posted in thread: GFI is it really needed ? on 01-21-2012 at 08:08 PM
    The GFCI protects you if you come in contact with a live wire and touch a grounded object. How
    necessary this is depends partly on how well you have constructed your electrical system, how
    often you p...

  • Posted in thread: Pid syl-2352 problem on 01-21-2012 at 07:43 PM
    Problem is i can get the the temp to stay at the set "sv" value 65 degrees Celsius in my case.
    It alway gets higher and higher.Do you have circulation in your HLT? If not you will likely
    overshoot the...

  • Posted in thread: A 3-Vessel 2-Tier 1-Pump E-RIMS for 30A on 01-12-2012 at 07:52 PM
    You have done such excellent work, man.How's it going on this build? Have you brewed on it
    yet?I have TIG welded the locknuts onto my HLT and BK. I would like to know/see how you wired
    up the element(...

  • Posted in thread: RIMs system with a wort grant? on 01-05-2012 at 12:57 AM
    I utilize a grant for maintaining the mash temps during the mash. I have 240Volt, 3500 Watt
    induction heater. It gravity feeds from the mash tun to the grant and I pump it back to the
    mash tun.3500 Wa...

  • Posted in thread: Converting the Frigidaire 7.2 cu ft Chest Freezer on 11-30-2011 at 03:08 PM
    Thanks Quaffer for the excellent blueprint. Thanks to everyone else who contributes to this
    thread! Here is my setup, I had forgotten to post the completed project. Five taps! :tank:
    Have you had fiv...

Following Stats
FORUM SIGNATURE
Alcohol, the source of - and solution to - all of life’s problems. H.J.S. My keezer, My E-brewery build thread, How I soldered 1" nut for heater
0 COMMENTS
POST A COMMENT