VIEW MY

Prodigalx2

Gift Premium Subscription To Prodigalx2

Join Date:

05-01-2008

Last Activity:

01-25-2012 1:47 PM

LATEST ACTIVITY

  • Posted in thread: Manifold in Keggle? on 04-15-2011 at 03:36 PM
    Wow... Way to go Bobby. Thanks for that!

  • Posted in thread: Manifold in Keggle? on 04-15-2011 at 02:29 PM
    I would have shown mine, but it was neither handy nor worked. I think possibly it's just a
    better idea to get a false bottom... As much as I hate to admit defeat.

  • Posted in thread: Please help me fix my barley water!!! on 04-28-2010 at 03:27 PM
    I'm going to try kegging some of it and see how it is carbonated. If it's any good then I'll
    just cut my losses. If it still tastes like barley water I'll try blending it in the kegs.
    Thanks for all y...

  • Posted in thread: Please help me fix my barley water!!! on 04-27-2010 at 09:24 PM
    It's a blonde ale. Honey may be a good idea! Are you suggesting that adding more wort would be
    a bad idea as well though?EDIT: Another question, how much honey would you recommend?

  • Posted in thread: Please help me fix my barley water!!! on 04-27-2010 at 08:08 PM
    I just did the calculations and this beer turned out at 2.5%... How carbonated are you
    suggesting I get it to? BTW I force carbonate. Thanks!

  • Posted in thread: Please help me fix my barley water!!! on 04-27-2010 at 05:47 PM
    What would the harm be? Lots of esters? I was assuming that it would be just like pitching over
    the same yeast twice...

  • Posted in thread: Please help me fix my barley water!!! on 04-27-2010 at 05:25 PM
    I need some advice... When I brewed last weekend I got a stuck mash and my efficiency was
    pitiful. I ended up with an OG of 1.031. It has already finished fermenting and the FG is
    1.006. It's SUPER wa...

  • Posted in thread: Paint Strainer Bag in Mash Tun: Good Idea? on 04-22-2010 at 09:20 PM
    Has anyone used a mesh bag with 17 pounds of grain or more? If so could you comment on what the
    dimensions were?

  • Posted in thread: Manifold in Keggle? on 04-15-2010 at 07:12 PM
    Has anyone had reasonable success using a soldered copper manifold in a Keggle? If so could you
    post pics or explain how you designed it? Thanks for your help!Edit: I should probably mention
    that this...

  • Posted in thread: False bottom problem... on 02-17-2010 at 04:06 PM
    I was planning on throwing 5 or 6 screws in about half way from the center and the edge. I'm
    going to plumb my drain valve through the center of it with 2 SS pipe nuts and a copper thread
    to sweat ada...

0 COMMENTS
POST A COMMENT