Last Activity:05-18-2015 12:19 PM
Posted in thread: Home Made Glycol Chiller from A/C unit on 07-29-2010 at 08:24 PM
One other thing I came across while researching was this: It is NOT recommended to submerge
single walled evaporator coils. While they are under pressure in a working system, they are on
the 'low' sid...
Posted in thread: Immersion Wort Chiller on 07-22-2010 at 01:10 AM
i built mine top to bottom then out, there will be a temperature diff between the top and
bottom of the pot unless you stir. I added a whirlpool tube to my IC, not for the whirlpool
effect but to keep...
Posted in thread: RO Water Storage on 07-17-2010 at 07:40 PM
You could also pickup a larger bladder tank and T the one you have or just replace it out.
Search google for "ro bladder tank" and you will find lots of places selling tanks you can
switch in for larg...
Posted in thread: RO Water Storage on 07-17-2010 at 01:21 AM
BTW, is this your setup? I have it saved in my bookmarks to steal ideas from later. :)One in
the same. Steal away...! Just don't try using a BCS or BrewTroller to control that Honeywell
Posted in thread: Chiller Idea!! Please Comment on 07-16-2010 at 01:04 AM
I don't know if it would be much cooler ;) :tank:, diffinately much awesomer! Yeah for going
with more than 1 "zone" it might work out smaller and maybe/probably even cheaper. Mylo how is
your freind ...
Posted in thread: RO Water Storage on 07-15-2010 at 10:50 PM
A buddy of mine just brought up a good point... Storing all that water could get funky with
algae, etc... Now that I think about it - that's probably the other reason for the bladder - no
air ever goe...
Posted in thread: RO Water Storage on 07-15-2010 at 09:44 PM
Does anybody know of any practical purpose of the specialized RO reservoirs that come with the
"under the cabinet" systems (2 gallon?). I know then have a pressurized bladder in them - is
that just to...
Posted in thread: Chiller Idea!! Please Comment on 07-15-2010 at 09:32 PM
I was hoping to have a couple SOFs with a single source for the temp so I can have seperate
fermentation temps (being run indepentantly within the SOFs by a digital HD thermostat). I was
hoping to hav...
Posted in thread: Brettanomyces Bruxellensis question on 07-13-2010 at 01:07 AM
I am new to the forum, but have been brewing for 5 years now. I have searched this forum and
others for similar questions but haven't found any, so if its out there be gentle. Here
goes...I am attempt...
Posted in thread: Spark Ignition for Brutus on 07-12-2010 at 07:48 PM
Spark wires - it has been mentioned that there is a length limitation. One end has a spark plug
type connection, the other a spade lug. Any source for a spark wire? Can I use STRANDED