Last Activity:06-04-2013 3:49 PM
Likes Given: 1
10 Likes on 9 Posts
Posted in thread: Wii on 09-19-2012 at 02:12 PM
marvel super hero squad and any of the lego games is what me and kid play. (Batman, star wars,
indiana jones, harry potter) Then there's the whole skylanders thing, but that's a whole nuther
Posted in thread: At my wits end with kegging on 06-27-2012 at 07:27 PM
It might also already be over carbed. Remember, if you are getting nothing but foam/head,
that's co2 coming out of solution, of course what's left will be flat. I'd pull it off the gas,
vent it, then ...
Posted in thread: Regulator/Kegging Problem on 06-14-2012 at 07:09 PM
You want to vent it after you make the adjustment too. Many things will affect pressure, such
as temp changes. 1 psi is not that bad. You have to remember that you probably had the keg at
15 psi. Just...
Posted in thread: Regulator/Kegging Problem on 06-14-2012 at 12:41 PM
No not broken, and sure it will. You must release pressure on keg for regulator to adjust
properly, otherwise it will read the pressure you applied/or is left at the keg/line. If you
put a blanket of ...
Posted in thread: Cant find keg leak on 04-12-2012 at 04:04 PM
I guess I didnt realize the CO2 would be absorbed and cause a decrease in PSI. I guess I dont
remember this on my other beers, since ive done the same thing. I will keep trying it and
seeing if it lev...
Posted in thread: Cant find keg leak on 04-12-2012 at 12:47 PM
+1, Exactly it sounds like what the posters above have stated. I bet you are taking it off the
gas. Until your beer reaches an equilibrium its gonna keep absorbing the co2 and your keg
pressure will d...
Posted in thread: over carbed?? or something else?? on 04-10-2012 at 04:21 PM
Sorry, but you're gonna be at same dilemna if you keep upping psi every time. Just leave it be
at 10-14psi and wait a few weeks for it to stabilize, maybe even a month.
Posted in thread: Labels on growlers... on 04-06-2012 at 03:38 PM
The easiest way is to buy a sheet of these to stick on there. One sheet is all you'd probably
need since they are reusable. www.BeerClings.comREALLY??? one label type and only 1 design. I
Posted in thread: carboy and keg power washer on 04-06-2012 at 02:02 PM
just look at the similiar threads box down below :)
Posted in thread: Cold crash on 04-04-2012 at 06:41 PM
that's because I dont believe its a huge science to it. I bring my fermenter down to 30-32F for
a week or more and then keg. I usually cold crash after 2 weeks of fermentation or after the