Gift Premium Subscription To Jer

Join Date:


Last Activity:

05-24-2016 2:33 AM


  • Posted in thread: solid state relay w/ heatsink on 12-10-2009 at 12:46 PM
    Except that it's rated for 5-220V DC.. The same person sells the 240-480V 40A versions as well,
    which I bought from them..Works great with my 5500W/240V element...Took a little less than 2
    weeks to ar...

  • Posted in thread: Programming question on 12-06-2009 at 01:03 PM
    For my touchscreen, I used C++ Builder and a component library called iocomp, because I had
    them available...The gauge is just an image with an needle overlaying it, scaling it correctly
    was a little ...

  • Posted in thread: Kegging setup purchase recommendations on 10-19-2007 at 11:14 PM
    I bought the 3 tap tower from micromatic... The thing that the handle attaches to came bend a
    bit... Called them and they overnighted a stainless steel replacement (original was brass)...I
    later upgra...

  • Posted in thread: Stout faucet, Beer gas or CO2?? on 10-12-2007 at 12:14 PM
    Actually, it is a newer faucet, so it looks like I can't adjust the restrictor plate...So it
    looks like I'll need some beer gas at higher pressure... I'll call around and hopefully find
    some place tha...

  • Posted in thread: Stout faucet, Beer gas or CO2?? on 10-11-2007 at 05:01 PM
    So it looks like I'll just buy a nitro tank and regulator then...Will pushing the rest of the
    beers with the beer gas through the normal faucets effect the flavor if I still carb with just
    CO2? Of cou...

  • Posted in thread: Stout faucet, Beer gas or CO2?? on 10-10-2007 at 03:35 PM
    From what I can find reading through the forums and a few other sites is that it seems like
    there are 2 options for using a stout faucet...Current for my set up, I have a triple faucet
    tower with 1 CO...

  • Posted in thread: Critique My Plan on 10-05-2007 at 08:07 PM
    I'd add extra ball lock fittings for filling/tranfering and cleaning...It's also nice to have
    some extra kegs for conditioning/storage, so you have some on deck when you empty a keg..

  • Posted in thread: Siphon - I must be missing something on 10-05-2007 at 01:05 PM
    I usually keg, but on occasion I bottle with a bucket and an autosiphon... The siphon usually
    sits right on the edge/corner of the bottom of the bucket and gets almost everything out of
    it... Never ha...

  • Posted in thread: How do you label you beer taps? on 10-03-2007 at 10:28 PM
    I used some balusters from home depot, cut the nice round pieces I wanted, sanded them down and
    attached them to a flat pieces that I routered the edges and embedded a piece of metal to to
    stick on th...

  • Posted in thread: How many gallons of EdWort's Apfelwein have been made? on 04-16-2007 at 03:21 PM
    10 more gallons for me...This is always a big hit with the non-craft beer drinkers...So 895.5

Following Stats