Last Activity:08-13-2012 4:21 PM
1 Likes on 1 Posts
Posted in thread: Looking for Trappist Westvleteren 12 on 03-22-2012 at 07:05 PM
I bought a couple bottles from belgianshop.com a year or so ago. Wasn't cheap.. but so good!
Posted in thread: Tri-Clover Ball Valves on 02-29-2012 at 06:58 AM
HiyaI am having a hard time sourcing these. Right now I need the tri-clover part to conform to
KF-25, or about 1" ID and 1.5" on the outer rim. Everyone I find is made to withstand 3500psi
and 3000k e...
Posted in thread: WTB: Tri-Clamp/KF/ISO tubing, flanges, temp probes, other gadgets.. on 02-29-2012 at 04:34 AM
search for Watlow temp probe on ebay - the thing is a beastI think I'm going to buy my probes
right from Omega. I have one RTD that I got from The Electric Brewery as a kit (Thanks Kal!).
Posted in thread: WTB: Tri-Clamp/KF/ISO tubing, flanges, temp probes, other gadgets.. on 02-29-2012 at 04:14 AM
Hi thereLooking to make a (very) small electric automated brewing system as a prototype for one
I can only afford later on in life. I like gadgets, even if not strictly necessary. As far as
the build ...
Posted in thread: $50 credit for photos/video on 06-10-2011 at 03:48 AM
Preliminary test with my 40-plate.
Posted in thread: Mesh size for kettle screen (30x30 too big for pellets going through a plate chille?) on 05-04-2011 at 04:50 PM
It's not that easy to figure out. The instinct is to just go finer but it also needs to flow.
You'll never stop all particulates which is why plate chillers require back flushing and
Posted in thread: Mesh size for kettle screen (30x30 too big for pellets going through a plate chille?) on 05-04-2011 at 03:35 AM
This is really a followup to this thread, and thought this might help others as well doing
similar projects. i am making a huge hop stopper, just two sheets of mesh around a dip tube in
my keggle. It'...
Posted in thread: Custom SS pipe for keggle on 05-02-2011 at 08:04 AM
I was just piecing together on my iPhone and that looked like a good size.So here's the deal. I
did some searching, and I think that 50x240 will be too fine and will get clogged. Check out
Posted in thread: Custom SS pipe for keggle on 05-02-2011 at 03:52 AM
How precisely did you pick out the mesh size? It seems that most people use 30x30, and the one
on McMaster is 50x240 and is rated at "superfine" - I feel like this is probably small enough,
but if it ...
Posted in thread: Custom SS pipe for keggle on 05-02-2011 at 02:00 AM
You can get it all from McMaster. Search for stainless steel pipe nipples. You will need a 6"
nipple threaded on both ends, a 90 elbow, a tee, a close nipple, washer and the mesh. Should
cost less tha...