Last Activity:10-20-2014 8:04 AM
Age:56 years old
Likes Given: 100
147 Likes on 118 Posts
Posted in thread: SS Brewing Technologies "That's a ton of Stuff!" Giveaway on 10-01-2014 at 01:19 AM
Posted in thread: Pneumatic Bottle Capper - Just...because. on 08-02-2014 at 06:57 PM
... I can't imagine you could possibly buy a compressor too small for this application.unless
its those tiny ones for airbrushing...yes, Sticky_icks - it may kick on during bottling -
unless you have ...
Posted in thread: The Great Hydra Giveaway! on 05-14-2014 at 02:24 PM
Posted in thread: Motorized Grain Mill Help on 04-25-2014 at 11:56 AM
Slightly a change of topic, but really want to bypass the pulley setup. I found this Bodine
motor on ebay. Specs look good but the RPM's at 140 might be a little low. Any thoughts on this
motor from t...
Posted in thread: Homemade Stir Plate Problem on 04-24-2014 at 06:48 PM
The rare earth magnet will most certainly interfere with the motor on the fan.I took a block of
plastic and centered it on the fan, glued it down. Then I glued the magnet on that, raising the
Posted in thread: Budget Wooden Rolling Pin Grain Mill on 04-24-2014 at 06:39 PM
Awesome !Just a word - I built my own, too. And it worked for a while. But even end-grain Oak
takes a beating. Over time, it will be too beat-up to crack the husks. You'll notice and at
first you can ...
Posted in thread: Motorized Grain Mill Help on 04-24-2014 at 06:36 PM
Other options:like Amazon
Posted in thread: fermentation completed too quickly? on 04-09-2014 at 08:36 PM
Hi Rhythm!... Or maybe both of us pitched our yeast at too high a temp! :oKombat is
correct.pitched okay, but if the wort was 75°F... ???Do your best to ferment in the ideal range
for your yeast. Ambi...
Posted in thread: One bottle in batch completely different than the rest on 04-09-2014 at 08:31 PM
someone playing tricks on you at home?