Last Activity:06-03-2014 9:25 PM
2 Likes on 2 Posts
Posted in thread: Cheap 240v temperature controller on 04-06-2014 at 04:39 PM
Spend a little more and get this model.I have bought a cheap PID in the past and ended up
buying a decent one. Also there is no mention of manual mode (which doesn't matter for the
herms i guess)
Posted in thread: RIMS in control panel on 04-05-2014 at 11:32 PM
1500W @ 120V = 12.5amp5500W @ 240V = 23ampAdd it all up and you get 35.5amp on one leg...30amp
breaker popped...You need to run off of one leg to get 120 he means. I am just going to go rims
Posted in thread: RIMS in control panel on 04-05-2014 at 03:06 AM
I am wondering if anyone is running a RIMS setup with a 30 amp control panel. I am looking into
this option but I am unsure of how to wire the RIMS as I will be running 1375w (11.5 amps) for
the RIMS ...
Posted in thread: HomeBrewTalk 2014 Big Giveaway on 03-30-2014 at 02:57 AM
Thanks to all of the sponsors that made this happen!
Posted in thread: Hop spider bag on 03-18-2014 at 02:27 PM
I am wondering if anyone out there uses a filter bag for their hop spider bag. I looking at
buying some 400 micron 7"x32" nylon bags to use for a hopspider on a keg but just curious if
anyone else is ...
Posted in thread: Lab Grade Stir Plate (Will Stir 5 gallons) on 03-12-2014 at 03:36 AM
I use one of these and it is awesome, picked mine up for $2 because the ceramic was broken on
the top but the heat function works great as well. (Use the heat function to keep my bullet
casting molds ...
Posted in thread: Summer Shandy Lemonade Beer on 03-11-2014 at 03:14 AM
Ingredients:8 lb Rahr Pale Ale malt6 lb white wheat malt1 oz Cluser (60 minutes) (~6.5%)0.5 oz
Cascade (10 minutes) (~6 %)(2 gallons) Simply LemonadeMash at 151 for 70 minutesBoil for 60
Posted in thread: Stay-Brite 1/8" 1LB Silver Solder on 03-11-2012 at 08:51 PM
If this was the #8 I would be all over itThis is the SB61 stuff right? I think your asking
price is pretty close to retail price, not meaning to thread crap but i think the 70-80 stuff
is the stay bri...
Posted in thread: Asking for HBT's help in purchasing keg equip on 01-30-2012 at 04:20 PM
figure out if 6 ball locks will fit, my GE fits 6 kegs with a little wiggle room but they
wouldn't fit if they were pin locks. Mine i picked up off craigslist for $50 so it isn't the
newest model out....
Posted in thread: I need kegs! Where can i get them cheap? on 01-29-2012 at 04:19 PM
Depends on your location and number of kegs....for me like 20 for 4 kegs