Last Activity:10-09-2014 11:36 AM
Age:36 years old
Likes Given: 3
2 Likes on 2 Posts
Posted in thread: Adding water after boil, before primary fermentation on 02-25-2014 at 09:18 PM
Its all relative to how much malt and hops you put into the original boil. As long as your
ingredients was targeting a 1 gallon batch, it should be ok. It would be hard to make a really
hoppy IPA with...
Posted in thread: Adding water after boil, before primary fermentation on 02-25-2014 at 07:46 PM
As long as its boiled to kill off any nasties from your well water, you should be fine. Its
common to add water after a boil when doing larger batches if you don't have a brew pot large
enough to do a...
Posted in thread: HomeBrewTalk 2014 Big Giveaway on 02-25-2014 at 11:51 AM
Posted in thread: co2 refill in Atlanta? on 08-01-2013 at 08:35 PM
I use Airgas. I haven't been to the downtown location, but I've gone to the one off of
Peachtree Industrial several times. I asked them and they said it was all food grade now. I get
both CO2 and beer...
Posted in thread: 40a GFCI breaker a mistake? on 01-15-2012 at 06:26 PM
Thanks for the advice. I think I will just do the 6/3 like ya' said since it is such a short
run and the cost won't be much different.I just hope that cheap breaker actually works. :)
Posted in thread: 40a GFCI breaker a mistake? on 01-14-2012 at 07:09 PM
Actually, my breaker box is in my garage, in the very corner that is the most convenient place
to setup the brew stand. So I'm most likely going straight down from the box so I can stay
within the sam...
Posted in thread: 40a GFCI breaker a mistake? on 01-14-2012 at 04:40 PM
I'm early in the research phase for converting over to electric. I'm going to go with a single
element brew in a bag style setup to keep costs down and keep things simple.One of the first
things I pic...
Posted in thread: Wiring assistance - single PID/SSR single kettle setup on 01-14-2012 at 04:13 PM
This diagram is also exactly what I was looking for. Even if the original requester decided not
to use it, it still adds to the wonderful collection of knowledge contained in this forum.
Posted in thread: Freakin Leakin Keg on 10-31-2007 at 03:47 PM
I had a very similar problem and the fix was indeed replacing the post o-ring with a new one.
The keg held pressure by itself. The whole CO2 system held pressure when not attached to this