Gift Premium Subscription To ExpertBrewers

Join Date:


Last Activity:

12-08-2009 7:30 PM


  • Male
  • Single


  • Posted in thread: Foaming Issues on 06-13-2009 at 09:11 PM
    1/4" line has ~0.7 lbs of resistance/foot so you are a bit over carbed, try force carbing a bit
    lower or if possible try 3/16" line.

  • Posted in thread: Nano Brewing in Restaurant on 03-27-2009 at 02:28 AM
    Hi,Check out the alcohol and gaming commission of Ontario. As far as I can tell, all you need
    is a Brew Pub Endorsement(Free) and to pay taxes as follows: Fees - Brew Pub EndorsementA
    Liquor Sales Lic...

  • Posted in thread: bottling the right way with no off flavors on 03-26-2009 at 08:36 PM
    If you are using a bottling wand connected to your spigot and you fear it is causing the
    problem. You could always just run a small piece of tubing from the spigot and use the spigot
    to control the fi...

  • Posted in thread: Hydrometer reading vs exposure to oxygen on 03-26-2009 at 08:34 PM
    How long has it been fermenting? If it has been more then 4-5 days give it a reading it won't
    hurt anything.

  • Posted in thread: Tri Clover conversion on 03-23-2009 at 11:14 PM
    w0w, now that you mention it, that is a nice tile floor. :pO ya, by the way nice conversion and
    even nicer rig.

  • Posted in thread: is it an illusion on 03-14-2009 at 11:37 PM
    Warmer beer has more flavor, try one that hasn't been refrigerated and let us know. Or try
    taking one out 10 or 15 minutes before drinking.

  • Posted in thread: Extra ingredients in rolled corn? on 03-14-2009 at 01:23 AM
    I doubt Ammonium Hydroxide is the greatest ingredient to have going into your beer. Feed grade
    fermentables are generally used in other applications, its not like your gonna run your beer
    through a st...

  • Posted in thread: Has anyone used this regulator set up? on 03-14-2009 at 01:18 AM
    Manifold are really common in CO2 distribution. Don't see why that particular one would cause
    any problems.

  • Posted in thread: Edme Red Ale on 03-14-2009 at 01:14 AM
    The can and 900g of DME should be enough for a 5 gallon batch.

  • Posted in thread: Canadian Corney Keg O ring suppliers on 03-11-2009 at 01:01 PM
    Hi, is up and running. I do have o-rings available. If you need any they can
    be purchased through the site, or if you just need some pm or email me because shipping is
    calculated for ...

Following Stats