DigityDan

Gift Premium Subscription To DigityDan

Join Date:

01-17-2010

Last Activity:

11-01-2013 3:32 PM

    ABOUT ME

  • Eugene
  • I am currently building a single tier brew stand.
  • Hiking and brewing
  • window coverings
  • Dan F.
  • Listening for Coyote
  • Celebration clone
  • air
  • none
  • Male
  • In a Relationship

LATEST ACTIVITY

  • Posted in thread: Questions about March Pumps answered by the Factory! on 09-24-2013 at 02:51 AM
    Is it possible to change the bracket over to the 809 style and then add the head? Or is there
    just now way possible an 809 head is going on the MDXT-3 pump?If not, is there an MDXT head
    replacement th...

  • Posted in thread: Questions about March Pumps answered by the Factory! on 09-23-2013 at 12:45 AM
    Will the 809 head fit a mdxt-3?

  • Posted in thread: Light Rye Ale on 04-19-2010 at 02:08 AM
    Brewed it yesterday, stuck with the original grain bill. but changed the hops.1oz cascade
    60m1oz willamette 10m10z willamette 5mMashed @152 for 60mWyeast German ale yeastFermentation
    activity 10 minut...

  • Posted in thread: High Temperature Paint Question... on 02-22-2010 at 12:41 AM
    Well I painted the whole thing with it and the bottom won't be getting any heat. I was hoping
    to hear that I could just leave it on and use it as a sort of primer, but I can rub it off with
    my fingers...

  • Posted in thread: New Stand Needs Paint. Need Advice on 02-21-2010 at 05:55 PM
    Try a high temp engine paint as an under coat or primer and two part ceramic paint for around
    the burner area. The high temp paint will keep the frame protected and the ceramic paint will
    keep the bur...

  • Posted in thread: High Temperature Paint Question... on 02-21-2010 at 05:47 PM
    [QUOTE=Bobby_M;945651]That BBQ paint is butt ugly. I tried it on my stand and hated it. Go to
    an auto parts megastore and buy header/exhaust paint. It's supposedly good up to 3000F but in
    any case, it...

  • Posted in thread: Gas Plumbing for Single Tier on 02-20-2010 at 02:05 AM
    I looked at Home Depot and then called every specialty plumbing and fastener place in town, no
    one had them. I called Lowes today and they have three left. Thanks Dude.

  • Posted in thread: Gas Plumbing for Single Tier on 02-19-2010 at 04:09 AM
    I just finished a single level brew stand and did a write up describing it. I listed the
    plumbing connectors I used... May be it will give you ideas. did you find the pipe hangers
    dude?

  • Posted in thread: Bayou Classic SQ14 w/ 20PSI regulator on 02-19-2010 at 03:43 AM
    You can use a higher pressure regulator for more BTU's... I use an SQ14 with the stock reg and
    it's fine for 5 gal batches, I'd probably upgrade regulators if I was brewing 10 gallons
    though.What PSI ...

  • Posted in thread: Any thoughts on this burner on 02-18-2010 at 04:59 AM
    I plan to do the same, so let me know how it goes.

Following Stats
0 COMMENTS
POST A COMMENT