Last Activity:06-25-2014 1:18 PM
Likes Given: 3
4 Likes on 4 Posts
Posted in thread: NorcalBrewing Solutions Giveaway! on 10-18-2013 at 01:04 PM
Posted in thread: Show us your sculpture or brew rig on 10-02-2013 at 03:11 AM
i've been brewing for a year and a half now and am at a loss when looking at all your setups. i
brew all grain 5 gallon batches. i have one floor burner and two pots. mash in one boil in the
other. i ...
Posted in thread: Brewer's Hardware 15 Gallon Stainless Steel Conical Fermenter Giveaway! on 08-05-2013 at 06:48 PM
Posted in thread: Show us your sculpture or brew rig on 07-19-2013 at 01:11 AM
Finally able to post in this thread. It's been a year in the making.How do you cool with that?
Posted in thread: StainlessBrewing.com Summer Giveaway! on 06-25-2013 at 09:37 PM
Posted in thread: Keggle, Step Bit, and Burned Metal on 06-18-2013 at 07:01 PM
I drilled my first using WD40 and smoked it. Using cutting oil for the rest made an enormous
difference. You may also need a new bit as the HF stuff isn't the highest quality steel and
will dull very ...
Posted in thread: ChuckJaxFL's single tier, all electric build thread on 06-05-2013 at 01:44 AM
C'mon, get a 10 pound spool!I would have loved to get a 220v welder. Had planned on running it
off the generator. Couldn't find one for anywhere near my budget so ended up with a Lincoln
Posted in thread: Brutus Style Brewstand Build on 05-23-2013 at 10:59 PM
These are the same dimensions as mine.BTW, BrewingGunner, didn't mean to sidetrack, derail, or
otherwise steal the thunder of your posts. Besides some pretty sketchy rip offs of the old BYO
Posted in thread: Brutus Style Brewstand Build on 05-23-2013 at 02:10 PM
I'll have to take actual measurements since the shop modified the design a bit, but here is the
jist of it.This is what I used (modified): lowered the bottom braces, removed the bottom
middle cross ...
Posted in thread: Lots of learning with this Brutus build! on 05-20-2013 at 03:24 PM
Holy crap. Eight hours or so in and I'm almost done. If I should ever build another stand I
will do the following:1 - Clean/grind all the metal right away before welding.2 - Not wait a
month and two b...