CoopDvr

Gift Premium Subscription To CoopDvr

Join Date:

08-22-2009

Last Activity:

09-15-2015 5:00 PM

Likes Given: 1

5 Likes on 4 Posts 

    ABOUT ME

  • Fort Worth, Texas
  • Diving,Woodworking,BEER!
  • Commercial Diver
  • Jam Bands and Folk
  • The Wall, Super Troopers
  • I don't watch much TV.
  • C.S. Lewis,rnSteinbeck,rnDostoevsky
  • Some Beigians, some IPAs, a Rye, whatever my friends throw on the docket......
  • NE Brown Ale
  • Red Schizophrenic
  • Death Defying Tripelrn
  • Two empty kegs seeking fresh homebrew for companionship without the long term commitment. Dark or Light okay; but must have a nice body with great head.
  • Married

LATEST ACTIVITY

  • Posted in thread: DIY Simple semi automated bottle filler ($40) on 10-26-2013 at 02:42 PM
    Nice! I like this setup. I keg now because I hated the tedious bottling process; but some
    batches I would rather bottle, and not have to run through my draft system to do so.I have a
    somewhat simpler ...

  • Posted in thread: Keg Pressure Tester on 10-23-2013 at 12:09 AM
    Element filters will not filter all the oil out, regardless of composition. There will always
    be some oil in the air unless you use a three stage coalescing filter system (expensive). If
    you don't wan...

  • Posted in thread: All stainless (weld free & JB weld free) heatstick design on the cheap on 10-18-2013 at 09:58 PM
    Awesome. That looks great!Keep an eye on it....I wouldn't trust a heatstick with a void in it.
    You will still get condensation on the inside of the pipe. Not to mention, heating and cooling
    causes the...

  • Posted in thread: All stainless (weld free & JB weld free) heatstick design on the cheap on 10-11-2013 at 01:45 AM
    That looks great! I'm looking forward to hearing how well it performs.

  • Posted in thread: All stainless (weld free & JB weld free) heatstick design on the cheap on 10-06-2013 at 07:05 PM
    Hey Coop, I just got my heating element and as expected it doesn't fit in the back. I'd love to
    borrow a tap to try to re-thread. Thanks for offering! It is indeed a standard 1" heating
    element. Like ...

  • Posted in thread: All stainless (weld free & JB weld free) heatstick design on the cheap on 10-05-2013 at 07:36 PM
    I guess I should've read more closely. Straight thread was already mentioned by Poobah. Anyway.
    I think it will work.

  • Posted in thread: All stainless (weld free & JB weld free) heatstick design on the cheap on 10-05-2013 at 07:31 PM
    I wasn't thinking about it being straight thread, but you're right. I don't have any NPS taps
    though. However, NPT and NPS have the same pitch. If the tap is run through far enough, it
    should thread i...

  • Posted in thread: All stainless (weld free & JB weld free) heatstick design on the cheap on 10-05-2013 at 02:46 PM
    Element (straight thread) won't screw into the back end of thread as previously stated. Do you
    plan to re-thread? Not gonna be easy!This is correct. However, it shouldn't be too difficult to
    rethread ...

  • Posted in thread: PicoBrew Zymatic on 10-04-2013 at 01:29 PM
    So, I guess we'll start seeing phrases like, "Have you tried turning it off and back on?" in
    the forums from now on.

  • Posted in thread: My 1/2" Tubing Roller Build on 08-23-2013 at 02:00 AM
    Thanks so much for posting the pics. I love what you did with the boil kettle. Id be interested
    hearing how the bk set up works out. Thanks for sharing your project.Thanks everty. I'd like to
    see what...

Following Stats
0 COMMENTS
POST A COMMENT