Last Activity:08-02-2015 10:43 AM
1 Likes on 1 Posts
Posted in thread: New Homebrew Club in Jo Co, KS on 09-25-2014 at 09:40 PM
Sounds good. Wish I could come, but I am on duty tonight. Our next brew is the 5th I will be
happy to PM an address if anyone wants to visit.
Posted in thread: New Homebrew Club in Jo Co, KS on 09-23-2014 at 05:04 PM
Cool to hear. We have been slowly starting a club as well. We are the Midwest Band of Brewers
(on facebook) and are also located here in JOCO. We started out as several guys brewing on a
one barrel sy...
Posted in thread: How we sour Mash on 06-28-2014 at 06:24 PM
I thing o2 is more of a problem than heat. I would be tempted to say sour the wort in a 5 g
carboy if you cant really seal off the mash. A corney would be great for a mash.
Posted in thread: How we sour Mash on 06-27-2014 at 03:43 PM
I made a photo book of how we did our sour mash. It was quite successful. Can't wait to taste
the finished beer.https://berlinerweissesourmash.shutterfly.com/We mashed in a milk can placed
into a wate...
Posted in thread: Any feedback on the Captain Crush Grain Mill? on 06-09-2014 at 01:36 PM
I did but it has not shown up
Posted in thread: Chillzilla as a HERMS and loving it. on 06-07-2014 at 03:36 PM
So you're using a fourth vessel to heat the HERMS water, not recirculating water from either
HLT, and using a small volume of water. I had thought you were recirculating water from one of
the HLT tank...
Posted in thread: Chillzilla as a HERMS and loving it. on 06-07-2014 at 03:08 PM
So what do you mean dump the first runnings? Batch sparge?which HLT are you using for step
mashes, the one with 168º water or 200º water? My setup on which I brew 11 gallon batches
(figuring i'll end ...
Posted in thread: Chillzilla as a HERMS and loving it. on 06-07-2014 at 02:44 PM
The RIMS thermocouple is at the wort output of the heat exchanger (chillzilla CFC) I am only
running 20 amps of 240v, so going from winter ground water to strike temp for a 1 barrel brew
takes about a...