Last Activity:04-20-2014 9:37 PM
Likes Given: 4
25 Likes on 24 Posts
Posted in thread: Auber SWA-24x1 on 04-19-2014 at 06:40 PM
I have the same issue. I was thinking about using a plug in timer to control a contactor that
would power the panel. Pretty easy build for a 120V 20A system but a little trickier for a
bigger system. ...
Posted in thread: Funk & Chiller Cleaning w/ NaOH on 04-18-2014 at 02:53 AM
The thing I've found with my plate chiller is you need a water hammer type effect and not just
a back flush. The turning water on full blast and then off and back on seems to kick out some
stuck in th...
Posted in thread: ISO 4 to 6 pass cold plate for jockey box. on 04-16-2014 at 02:30 AM
I have a 4, 5 and a 6 pass with fittings. Not sure where you are at and what shipping would be
as they are heavy. Sent from my iPhone using Home Brew
Posted in thread: New Panel Build on 04-14-2014 at 08:15 PM
I suppose I could run something like that but then it would just tell me when my SSR is firing
or not. That's not really the same as the high and low alarm capabilities. The reason I really
care at al...
Posted in thread: o2 flow meter on 04-13-2014 at 04:43 PM
I think the brand of the disposable tank regulator is Liquid Bread but I'm pretty sure it's the
same one that all the brew shops carry. Sent from my iPhone using Home Brew
Posted in thread: New Panel Build on 04-13-2014 at 04:31 PM
Some bad news. I got everything hooked up and was trying to get all the settings on the PIDs
dialed in and I couldn't get the audible alarm to sound. After hours with a meter and the
manual, I figured...
Posted in thread: o2 flow meter on 04-13-2014 at 03:02 AM
I use the big tank for batches and the disposable one as a loaner for the less fortunate and
for starters. One will last way longer but cost more. I'd say Oxygenation is worth it so just
go for it and...
Posted in thread: o2 flow meter on 04-12-2014 at 04:57 PM
Here are my setups for a normal and disposable tanks. 192690192691I usually flow at 1L/min
which is at the low end of the scale for these meters. Beware of medical regulators unless you
have a source ...
Posted in thread: Minimum size for HLT in HERMS brewing on 04-09-2014 at 02:55 AM
If you haven't bought anything yet you can follow my thread. I'm building a dedicated HERMS
system for what I hope to be 50$ to follow the link on my phone and it takes me to the 'Why is
this forum s...
Posted in thread: Free Online Beer Chemistry Course on 04-09-2014 at 02:21 AM
I'm still in. I don't feel like I'm learning much and there seems to be more beer chemistry
trivia like question and not really geared to making me a better brewer. I think there could
have been more ...