Last Activity:11-18-2016 3:04 AM
Likes Given: 2
2 Likes on 2 Posts
Posted in thread: Counter flow chiller upgrade on 10-16-2016 at 09:30 AM
There's caps on it. The top one is there. The bottom on is behind where the refrigerant goes
in. The inner tube is completely surrounded by -40° refrigerant. Also this wouldn't be used for
a wort chil...
Posted in thread: Counter flow chiller upgrade on 10-16-2016 at 05:46 AM
Posted in thread: Counter flow chiller upgrade on 10-16-2016 at 05:03 AM
I take it none of you are impressed. If I don't have much going on tomorrow I'll fire it up and
take another pic.
Posted in thread: Counter flow chiller upgrade on 10-14-2016 at 11:29 PM
Here it is in all it's glory, not pretty by any means but I just threw it together.
Posted in thread: Counter flow chiller upgrade on 10-12-2016 at 04:20 AM
any chance you can put up some pics and information about this? I assume it's custom built?I'll
try to remember to take a pic tomorrow. It's not a looker by any means lol. You removed the
Posted in thread: Condensation problems on 09-28-2016 at 08:16 AM
Put a dollar in the seal, shut the door, and pull it out. It should be somewhat hard to pull
out. Do that around the whole door, and it will tell you where your seal isn't sealing.
Posted in thread: Counter flow chiller upgrade on 09-28-2016 at 08:07 AM
I'm sure it has been done with chilled glycol. AC condenser goes into a cooler full of glycol.
recir pump pushes the chilled glycol. There are specialized glycol chillers for this sort of
Posted in thread: Need some advice on moving CO2 tank outside the keezer on 09-15-2016 at 03:08 AM
You could countersink it a little with a forstner bit, they cut flat. That would give you room
for the washer.
Posted in thread: Need some advice on moving CO2 tank outside the keezer on 09-14-2016 at 08:17 AM
Hop on TS sometime. You only need one bulkhead if you want to use that. Personally I would just
run the hose through the collar and seal it. Is the regulator on the tank your only regulator
Posted in thread: Jockey box cooling options? on 08-28-2014 at 12:13 AM
Is it delivered yet?