Last Activity:03-16-2013 6:56 PM
2 Likes on 1 Posts
Posted in thread: What's your occupation: Engineer or Non-Engineer on 12-30-2012 at 01:29 AM
I have a masters in computer engineering and grew up working for my dad who was a mechanic.
Fabrication is in my blood.
Posted in thread: Newb kegging question on 12-29-2012 at 02:11 PM
Also, if you are keeping your C02 bottle in your kegerator, the pressure will go down
significantly and appear like the bottle has lost gas. If you warm it up again, it will come
back up to pressure. ...
Posted in thread: Valves and connections for propane on single tier on 12-29-2012 at 01:27 PM
I didn't like the "light-switch" option either so I took some ideas from the Electric Brewery
website and built this junction box. It was pretty easy to put together.Here's the list of
materials and w...
Posted in thread: E.S.B. Recipe - Thoughts? on 12-28-2012 at 12:01 AM
I have made the following recipe several times with great results:11 lbs Maris Otter12 oz
Crystal 20L12 oz Victory Malt4 oz Honey Malt1oz Magnum @ 601oz Willamette @ 101oz Willamette @
1I also build u...
Posted in thread: Show us your Kegerator on 12-27-2012 at 11:49 PM
Here's my "little" Kegerator
Posted in thread: 4 Popular Brew Kettles Compared on 12-27-2012 at 11:32 PM
I have 3 Blichmann 10 gallon kettles and I have nothing but good things to say about them. The
mash tun false bottom works really well. I've brewed 40 all-grain batches and have never had a
Posted in thread: How long are your beer lines? I have foamy beer! on 12-27-2012 at 11:15 PM
I have an 8 tap setup. I made all my beer lines 6' long and run at 10 to 12 psi until the beer
is fully carbonated. Then I back down to 5 or 6 psi. I keep the kegerator at 35 degrees and I
get nice po...
Posted in thread: So im in the process of building my rig... on 12-27-2012 at 11:12 PM
I agree with Chrisl77. I have the exact same regulator and 3 banjo burners with needle valves
on each. They work great.
Posted in thread: Valves and connections for propane on single tier on 12-27-2012 at 11:10 PM
I just finished my single tier build and went through the exact same steps. I ended up using
stainless steel pipe rather than black iron. My old setup rusted like crazy. I also went with
Apollo brass ...
Posted in thread: Check your Brewhaulers! on 12-27-2012 at 11:01 PM
I have six glass carboys and six brew haulers. Been using them for a year and never had a
problem. I move my full carboys across carpet and tile to my fermenting closet off our bedroom.
I'm pretty sur...