VIEW MY

2puttbird

Gift Premium Subscription To 2puttbird

Join Date:

03-06-2011

Last Activity:

08-13-2014 9:47 PM

Likes Given: 3

1 Likes on 1 Posts 

LATEST ACTIVITY

  • Posted in thread: Show us your Kegerator on 07-06-2013 at 01:41 PM
    Started this project on 06/13/13, and finished the keezer this morning. How does it look?Nice
    touch trimming the collar with the oak one-bys, and extending them up to cover the lid seal.
    Good work!

  • Posted in thread: Converting the Frigidaire 7.2 cu ft Chest Freezer on 05-16-2013 at 12:54 PM
    Is the thermostat control really needed if the freezer comes with a basic dial adjustment. Has
    anyone used the johnson control that you plug the freezer into or is it best to stick with the
    love therm...

  • Posted in thread: Tracking down a very small CO2 leak ... on 04-15-2013 at 01:34 AM
    Hi all.Bought the 742-2, which allowed me to rip out the header and primary gas line. Ran an
    overnight pressure test and it was solid as a rock. I'm back up and running!Thanks, everyone,
    for the tips ...

  • Posted in thread: GE 7.0 Coffin Keezer Build on 03-29-2013 at 01:51 AM
    Outstanding ... a real piece of furniture ... congrats!

  • Posted in thread: Regulator recommendations requested on 03-18-2013 at 01:19 AM
    Hi All,I'm considering replacing my regulator, and I'd appreciate any recommendations that
    you'd care to offer.I'm using a 5 lb CO2 bottle, with the regulator mounted directly on the
    bottle ... the ma...

  • Posted in thread: Thought for a bar cooler on 03-18-2013 at 12:57 AM
    A window AC unit will only get down to about 55F at the lowest and will be very noisy (because
    it's designed to cool a room, not a box).Instead, I would pick up a used fridge and use the
    guts out of ...

  • Posted in thread: mounting fans in keezer on 03-18-2013 at 12:51 AM
    I used a piece of PVC pipe with several holes drill at the bottom and a 45 fitting at the top,
    then glued a PC cooling fan to that fitting so that it pulls air up through the pipe and
    directs it at t...

  • Posted in thread: Tracking down a very small CO2 leak ... on 03-18-2013 at 12:38 AM
    Thanks for the reply. It's currently sitting pressurized with all of the valves off, so the
    secondary gage is reading the pressure of gas in the regulator, the main hose, and the
    distribution header.T...

  • Posted in thread: Tracking down a very small CO2 leak ... on 03-17-2013 at 11:13 PM
    Thanks for all of the helpful replies, guys. Bought some high-end bubble stuff (sorry if I'm
    getting too technical) and cranked it up to 40psi, but couldn't find anything. Even used it on
    the regulato...

  • Posted in thread: Keezer Build Budget/Cost Ideas? on 03-17-2013 at 12:21 AM
    My keezer is a 7 cu ft Frigidaire with a collar ... two taps ... I bought a brand new freezer
    and used some other expensive materials (plus, I bought 3-tap kit even though I only used 2 in
    the end, bu...

FORUM SIGNATURE
_________________________________________________ If you're not having fun, lower your standards ... My keezer build thread --> Mid-Missouri freezer conversion
0 COMMENTS
POST A COMMENT