Last Activity:11-06-2012 5:20 PM
Posted in thread: Cleaning tap lines and taps with one pass of solution on 03-08-2012 at 01:32 AM
Perfect, I clean the keg anyway after a batch so this is the way to go, thanks. I tend to
Posted in thread: Cleaning tap lines and taps with one pass of solution on 03-08-2012 at 01:06 AM
I am looking for some advice on how to clean all my tap lines without a bunch of disassembly.
My thought is to daisy chain all the lines but I donít know how to attach the keg line out
Posted in thread: beer shank size on 01-06-2012 at 10:42 PM
I ordered 4 stainless beer shanks and the tailpieces and nuts are really loose on the shanks. I
think the usage of .875 stainless bar stock is where the issue started. The major thread dia
should be ....
Posted in thread: First time using Yeast dump from conical on 10-11-2011 at 10:56 PM
So what I am hearing is that the risk of using the 3 month old Yeast is worth saving the $7 vs.
using a new vial. I am going with it because I would like to start using my old yeast. I had a
Posted in thread: First time using Yeast dump from conical on 10-10-2011 at 09:57 PM
Hi all, I have my first yeast dump that is in a mason jar and the yeast is about 1" thick in
the canning Jar. It is 3 months old today and it has been in the refrigerator. It smells nice.
So, I want t...
Posted in thread: Brewhemoth Chiller pump on 07-27-2011 at 12:03 AM
No need to reduce using the diaphram. 1/4" id line does it all. 30 lbs of pressure at 1 gallon
pushes it through fine. So far I have 2 batches done using this pump. Self priming is a really
nice way t...
Posted in thread: Jet engine Brewhemoth on 07-05-2011 at 01:25 PM
Wow, thanks, so what would be the best way to provide Steril Air, a starsan soaked rag over one
of my tri clamp openings at the top of the fermenter?
Posted in thread: Brewhemoth Chiller pump on 07-05-2011 at 01:23 PM
I have had the chiller up and running with a Ranco and the Tool-NorthStar 12 Volt On-Demand
Diaphragm Pump - 1 GPM @ 40 PSI, for about 3 day's now. I Couldn't be happier. A word of
caution though, you...
Posted in thread: Jet engine Brewhemoth on 07-04-2011 at 02:22 PM
So I built a little element that tri-clamps into the bottom of my Brewhemoth to Steam sterilize
my conical to kill all the little nasties. I had a 1Ē braided blow off hose into 2-1/2 to 3
gallons of S...
Posted in thread: Question on covering end of element with JB on 06-19-2011 at 12:21 PM
On the ends of my 110v 1500w hot water element you can see the connection wire that goes down
into the element may be designed to rest against the connection almost as if it is designed to
allow for e...