18DPA

LATEST ACTIVITY

• Posted in thread: Super Simple 15G Plastic Conical on 05-16-2013 at 11:13 PM
  I'm not sure how I did it but when I turn the system off and break the seal on the cam lock
  gravity pulls the glycol back up the lines and I get maybe a couple teaspoons worth that I just
  catch with a...

• Posted in thread: Super Simple 15G Plastic Conical on 05-16-2013 at 10:31 PM
  I have camlock fittings right on the lid where my hoses from the cooling system come in. I just
  DC them and then put the little camlock plugs in both the male and female ends. I'm running a
  glycol mix...

• Posted in thread: Super Simple 15G Plastic Conical on 05-16-2013 at 09:58 PM
  Cool! I'm jealous. Central Texas winters are still pretty warm. One hint. I got lazy with a
  batch and didn't do a really thorough job cleaning and sanitizing the fermenter lid that my
  coil is mounted ...

• Posted in thread: Super Simple 15G Plastic Conical on 05-16-2013 at 08:41 PM
  I was doing a bunch of reading a while back. I'm curious about the temp transfer through the
  wall of the plastic conical. I chose a SS in the middle of mine instead. I can't lager but can
  keep even a ...

• Posted in thread: Super Simple 15G Plastic Conical on 05-16-2013 at 06:37 PM
  Whoa you really churched it up. I have a simple ranco, a pond pump with a as coil in the middle
  of the wort. Nice. I'd like too see pictures.

• Posted in thread: Super Simple 15G Plastic Conical on 05-16-2013 at 05:15 PM
  So you spent 60$ bucks more for 3 from one distributer to another mehhhh. You're going to love
  these. I'm running two 15 gallon conicals . One at room temp with the commercial stand (need to
  weld long...

• Posted in thread: Super Simple 15G Plastic Conical on 05-15-2013 at 06:49 PM
  Yea spratsmarter has them in stock. I ordered from rural king and got the same. Spratsmarter
  was a couple bucks more but had it in a week. This was about 6 weeks ago.

• Posted in thread: Super Simple 15G Plastic Conical on 04-12-2013 at 05:37 PM
  I just came across this thread and I'm not going to sift through 71 pages, :P, but has anyone
  actually read that on this is only good for liquids up to 1.7 specific gravity?"Tanks are
  manufactured fro...

• Posted in thread: Bee Cave Brewery Oktoberfest Ale on 03-12-2013 at 10:12 PM
  I used a Kolsch yeast, Kept it around 65 degrees and it turned out very mellow but still a good
  beer!! Ed's recipes are very solid and I haven't had a bad one yet. Very easy to do, play with,
  and subs...

• Posted in thread: Super Simple 15G Plastic Conical on 02-10-2013 at 04:17 PM
  Question about the valve you guys are using on the bottom of the conical. I've seen some people
  with stainless butterfly and ball valve, but I was hoping to go a cheaper route and use pvc. I
  have hear...