New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Soda Making > Soda from fruit and other raw ingrediants




Reply
 
LinkBack Thread Tools Display Modes
Old 11-16-2012, 07:06 PM   #1
sicabeer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: New York
Posts: 53
Liked 1 Times on 1 Posts

Default Soda from fruit and other raw ingrediants

I'm trying to get my head around the best way to make some syrups and sodas from fruit, herbs, etc. I also want them to have some sort of shelf life.

Lets take oranges, peaches and apples for instance. I know I need to heat them at some point. My first thought was to boil cut up oranges to get the flavor, but I think squeezing them or using a steam juicer might be a better option. Also I'm not sure a steam juicer might be the most efficient. Would a mechanical juicer be better? Then I would still need to heat it.

If I use a steam juicer, would I have to add acid back into it? If I'm just using fruit and other non syrup/concentration ingredients do I need to add gum Arabic.

Has anyone had any experience with this at all?



__________________
sicabeer is offline
 
Reply With Quote Quick reply to this message
Old 12-03-2012, 05:41 AM   #2
revco
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Missoula, Montana
Posts: 225
Liked 24 Times on 19 Posts
Likes Given: 1

Default

I've experimented a little in this with different fruits. First off, I've found that using a juicing machine typically results in an unappealing texture for a soda, but allows for some interesting fresh fruit combinations. As good as modern juicers are, you get pulp in the juice and even with good filtration, some pulp may settle out in the soda. Larger batches can prove difficult to filter with crude home-based filters like coffee filters.

I tried simmering and boiling and wasn't too successful at getting a great extract with most fruits I tried. I have meant to try doing something like shredding in a food processor first, which would certainly improve extraction results, but haven't gotten around to it. I haven't tried a steam juicer, so I couldn't tell you the results of that method, nor provide advice.

If you want to play with a batch, I recommend scaling recipes down to about 4 or 8 ounces to taste different ingredient combinations. I would prepare samples of my desired ingredients, combine in their respective percentages and taste test my mini-batches until the desired flavor was reached. Obviously these aren't carbonated, but give you an idea of the final taste and texture. This also allows you to dial in adjunct flavors, such as lime, that can easily overpower.

Also, you typically want to make sure you combine with water, because straight fruit juice can be pretty sweet. Diluting also helped reduce the time to bombing in the bottles, since I yeast carbonate. I typically would consume a gallon in a couple weeks, so I haven't done long term storage and suspect it's vulnerable even with excellent sanitation techniques.

I would typically bring the mixture up to around 165 and maintain it for around 10-15 minutes. Milk pasteurization techniques would also probably work, which is 145 for 30 minutes.

That's my experience...hope it helps!

__________________
revco is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cider ingrediants tomatom89 Cider Forum 5 05-17-2012 02:35 PM
IPA With These Ingrediants? Helper Beginners Beer Brewing Forum 3 04-23-2012 10:34 PM
Can You Use Fresh Fruit to Make Soda Pop? ms8miranda Soda Making 20 09-06-2010 08:54 PM
What is alcohol content in my fruit juice soda?? duganderson Soda Making 4 06-25-2010 03:38 AM
Storing Ingrediants Atticmonkey Beginners Beer Brewing Forum 6 02-22-2006 09:43 PM