Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Soda Making > Inexpensive CO2 tank regulator?
Reply
 
LinkBack Thread Tools
Old 11-26-2012, 08:16 PM   #1
Keibatsu
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2012
Posts: 15
Default Inexpensive CO2 tank regulator?

I am considering adapting my paintball tank to a normal CO2 tank regulator, currently I am using a paintball regulator with some refrigerator tubing and a tire chuck at the end, I carbonate using 2 liter bottles with a cap that has a tire valve in it. The problem with this is it can waste a lot of CO2 from when I try to charge the bottle, the paintball regulator does not regulate much below 100psi, and I cannot accurately control the amount of CO2 I am charging with, I simply push the chuck to the tire valve for a split second and check if the bottle is firm. However I cannot seem to find a regulator for much less than $45, are they really all that expensive? I mean the paintball regulator I am using only cost $15. I will also need to get an adapter for the paintball tank to fit in the regulator, fortunately I have seen some online.

__________________
Keibatsu is offline
 
Reply With Quote Quick reply to this message
Old 11-27-2012, 05:00 AM   #2
acidrain
Feedback Score: 3 reviews
Recipes 
 
Join Date: Jul 2012
Location: Seattle, Washington
Posts: 1,670
Liked 132 Times on 114 Posts
Likes Given: 29

Default

The Harbor Freight regulators will work with some altering:
They use a metering orifice (at the outlet) with a gauge that is calibrated to the orifice size to read in flow (ass backwards way of showing flow for welding).
They also come with two different inlet adapters, so...
Take the reg apart by unscrewing the body and removing the spring and diaphram.
Drill out the outlet opening to about 3/16"
Blow/clean out all the chips and re-assemble.
The inlet parts thread into the body and can be changed. See if you can adapt the inlet to accept a PB ASA. Keep in mind that room temp Co2 pressures are in the 850 psi range.

__________________

Keg #1: Bourbon/Oak Vanilla Porter
Keg #2: Cascadian Stout
Keg #3: BMC West
Bottled: Mjolnir Mead, Lazy Daze Hefe, The Bollocks ESB, Dark Matter stout.

acidrain is offline
 
Reply With Quote Quick reply to this message
Old 11-27-2012, 06:12 PM   #3
MrFoodScientist
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2011
Location: Erie, PA
Posts: 544
Liked 34 Times on 32 Posts
Likes Given: 4

Default

I believe I've seen some used beverage regulators on ebay occasionally for around $25.

__________________

Find Recipes on my blog: The Homemade Soda Expert I'd love some feedback!
Now Available from Quarry Books -- Making Soda at Home: Mastering the Craft of Carbonation
Like on Facebook!, Follow on Twitter, Add to Goodreads

MrFoodScientist is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted: Source for Inexpensive Dual-Gauge Regulator ultravista Bottling/Kegging 2 12-21-2010 06:12 PM
Looking for an inexpensive regulator TRainH2o Bottling/Kegging 12 09-20-2010 04:16 AM
For Sale - CO2 Tank, Regulator & Tap llenrocs For Sale 8 09-22-2009 02:56 PM
20# CO2 tank for Nitrogen tank and regulator gruversm Equipment/Sanitation 1 03-09-2009 08:13 AM
*Too* inexpensive regulator? chrisdelay Bottling/Kegging 10 03-31-2008 08:20 PM