Ss Brewing Technologies Giveaway!

Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Soda Making > Can I use a refrigerator to store syrup rather than using cold plate?
Reply
 
LinkBack Thread Tools
Old 03-18-2010, 03:05 PM   #1
KCBrewer
HBT_LIFETIMESUPPORTER.png
Feedback Score: 2 reviews
 
KCBrewer's Avatar
Recipes 
 
Join Date: Feb 2010
Location: Independence, MO
Posts: 7,895
Liked 1394 Times on 1366 Posts
Likes Given: 25

Default Can I use a refrigerator to store syrup rather than using cold plate?

I should start by saying that I have no experience in soda dispensing, beer yes, soda no. I'm wanting to add a wunder bar dipsenser to my home bar setup. I found a wunder bar dispenser and carbonator, and I have a spare 20lb co2 tank with regulator. If I understand correctly, the only other parts I need are a syrup pump for each flavor, and a cold plate. I have a refrigerator 4-5' from the spot the soda will be dispensed at, so can I just store the syrup in the refrigerator and insulate the lines rather than using a cold plate? Are there any other components to the system I am overlooking?

__________________
"I'm no gynecologist, but I'll take a look at it."
KCBrewer is offline
 
Reply With Quote Quick reply to this message
Old 04-09-2010, 04:37 AM   #2
Jaybrinks
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Tacoma, Washington
Posts: 112
Liked 3 Times on 3 Posts
Likes Given: 6

Default

You will get flat soda and an inconsistent brix....i.e. (water to syrup ratio.) The syrup that sits in the line overnight will be warm and will make the soda taste completely flat. The warm syrup will pour faster than the cold syrup. Which changes your brix. The tried and true method is room temp bibs and tubing...running through an ice cooled cold plate immediately prior to dispensing......many years of trial and error.

With post mix...your finished product needs to leave the nozzle below 39 degrees without ice in the glass, or else the soda will taste flat. While the cold plate may be a little inconvenient in the home setting....it is the most effective for a bar gun setup. Any other method will probably cause you much frustration with flat pop.

I install fountain equipment for a living and even the bargun/coldplate is a challenge to pour top quality finished product..compared to the countertop self serve units.

With the bargun....you want the shortest distance from the coldplate to the bargun.....and keep those lined insulated with foam tape....but no matter what...the 1st pour from a bargun after it has sat for a couple hours will be flat.

If you refrigerate syrup boxes, run them 4 or 5 feet and mix it with ambient temp carbonated water......you will have nothing but problems and inferior soda.

Ice it man.....and it will be good. LOL.....hope this helps

__________________
Jaybrinks is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale - Cold plate Lentrave For Sale 0 07-14-2009 12:28 AM
Refrigerator getting too cold pjk49202 Bottling/Kegging 11 06-19-2009 02:55 PM
Best way to store H2O filter and plate chiller? TeufelBrew Equipment/Sanitation 2 02-23-2009 05:34 PM
How to store syrup malt extract Thirdeye Beginners Beer Brewing Forum 1 01-13-2008 12:56 AM
Cold plate ? tbulger Bottling/Kegging 4 12-17-2007 02:00 PM