gwjames47

Recipes 

I thought I would share some images of my Kegerator conversion, GE model WMO4GAZBB from WalMart. I had some aluminum treadplate that I thought would work for the inside of the door as well as a nice decorative touch to the door. I will be installing two Perlick faucets through the door. My kegging equipment should be arriving tomorrow. The freezer element was easy to bend down and place against the back wall and with a bit of massaging flattened out enough to be mounted to the side walls with the original mounting screws.




http://www.homebrewtalk.com/attachment.php?attachmentid=30028&stc=1&http://www.homebrewtalk.com/attachment.php?attachmentid=30029&stc=1&d=13110192 49d=1311019203http://www.homebrewtalk.com/attachment.php?attachmentid=30030&stc=1&d=13110192 92

Gridlocked

Recipes 

Nice work!!!

__________________
Sweetcel: "try this, it was dry-hopped with a lot of climax."

gwjames47

Recipes 

Thanks, can't wait for the my kit to get here to install.

It will set on my bar and so the faucets will be at a good level for drawing beer. Had it been installed on the floor I would have made a box for it to set on.