Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Home Brewing Photo Forum (http://www.homebrewtalk.com/f85/)
-   -   Inline oxygen system (http://www.homebrewtalk.com/f85/inline-oxygen-system-378942/)

mpcluever 01-06-2013 12:42 AM

Inline oxygen system
 
Testing out the mobile app, but just finished the inline oxygen stone

mpcluever 01-06-2013 12:43 AM

Ya that pic didn't come through.

Camlocks from bargainfittings and the stone from Williams Brewing.
http://i83.photobucket.com/albums/j3...-36-35_329.jpg

mccumath 01-06-2013 12:51 AM

Any other pics? Looks like a great idea! Stone mounted inside the T?

mpcluever 01-06-2013 12:55 AM

Kinda hard to see, but without that female end on there, I was able to crank it down just enough that the stone is touching the other side, but screwed in enough that it shouldn't leak.

http://i83.photobucket.com/albums/j3...-53-33_386.jpg

mccumath 01-06-2013 12:57 AM

Quote:

Originally Posted by mpcluever
Kinda hard to see, but without that female end on there, I was able to crank it down just enough that the stone is touching the other side, but screwed in enough that it shouldn't leak.

http://i83.photobucket.com/albums/j3...-53-33_386.jpg

So the stone fits snugly in the T, and the input O.D. of the stone roughly mates up to the size of the I.D. of the hose barb?

mpcluever 01-06-2013 01:05 AM

Sorry, don't quite follow. It's a 1/2" Tee with came locks on both ends so it connects inline with my current system. The stone is kind of wide such that I worry a little bit about flow, but there's enough room going past it that it should be just fine. Looks like a 3/8" barb so I'll use 5/16" bev tubing and put air tool quick connects on such that I can just wrap it up with the Tee on the end and connect it all to the tank as needed.

mccumath 01-06-2013 01:07 AM

Quote:

Originally Posted by mpcluever
Sorry, don't quite follow. It's a 1/2" Tee with came locks on both ends so it connects inline with my current system. The stone is kind of wide such that I worry a little bit about flow, but there's enough room going past it that it should be just fine. Looks like a 3/8" barb so I'll use 5/16" bev tubing and put air tool quick connects on such that I can just wrap it up with the Tee on the end and connect it all to the tank as needed.

How does the stone connect to the barb inside the T? Or does the stone connect directly into the barb on the inside of the fitting?

mpcluever 01-06-2013 01:10 AM

And here's the whole assembly after the chiller.

http://i83.photobucket.com/albums/j3...-08-28_949.jpg
http://i83.photobucket.com/albums/j3...-08-55_492.jpg

mpcluever 01-06-2013 01:21 AM

http://i83.photobucket.com/albums/j3...-13-51_660.jpg
http://i83.photobucket.com/albums/j3...0-14-37_88.jpg

mpcluever 01-06-2013 02:30 AM

This is the stone
http://www.williamsbrewing.com/Asset...Images/J12.jpg
http://www.williamsbrewing.com/12-NP...P3076C106.aspx


All times are GMT. The time now is 01:12 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.