 |
|
07-17-2008, 02:01 PM
|
#1
|
|
Senior Member
Join Date: Jun 2008
Location: Madison, WI
Posts: 587
|
Sparging in BeerTools Pro
|
|
Is there any capability of doing fly sparging/batch sparging calcs in BTP?
Last edited by noisy123; 07-17-2008 at 02:05 PM.
|
|
|
|
07-17-2008, 02:11 PM
|
#2
|
|
Senior Member
Join Date: Dec 2006
Location: Doylestown, PA
Posts: 3,739
|
<-----me
Have you grabbed the batch sparge recipe template from the wiki?
|
|
|
|
|
07-17-2008, 10:52 PM
|
#3
|
|
Senior Member
Join Date: Jun 2008
Location: Madison, WI
Posts: 587
|
Quote:
Originally Posted by brewt00l
<-----me
Have you grabbed the batch sparge recipe template from the wiki?
|
No but I'll look it up. Do you have a link? Is there a fly sparge too? Thanks!
Last edited by noisy123; 07-17-2008 at 11:01 PM.
|
|
|
|
|
07-17-2008, 11:38 PM
|
#4
|
|
Senior Member
Join Date: Dec 2006
Location: Doylestown, PA
Posts: 3,739
|
|
|
|
|
|
07-18-2008, 12:12 AM
|
#5
|
|
Senior Member
Join Date: Sep 2007
Location: Behind the zion curtain
Posts: 941
|
The beta has Batch and Fly sparge options in it, and they function quite well.
__________________
Coming Soon:
Primary: Stone Vertical Epic 08.08.08
Secondary: Oaked Arrogant Bastard
Conditioning: Dead Guy Ale clone, Double-Dubbel
Drinking: Not for a while
|
|
|
|
|
07-18-2008, 12:28 AM
|
#6
|
|
Senior Member
Join Date: May 2006
Location: Lapeer, Michigan
Posts: 2,232
|
Yes it does and I use it all the time. What are you having problems with?
|
|
|
|
|
07-18-2008, 05:04 AM
|
#7
|
|
Senior Member
Join Date: Aug 2006
Location: Piscataway, NJ
Posts: 19,424
|
I think the issue is that there aren't any presets like in beersmith, at least not in the current live version. The schedule has a couple things available; mash in, sac rest, infusion (if you mash out or step mash), and separation (which is a lauter/sparge). All of these can be used for either fly or batch.
__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!
Personal Website, All Grain Primer, Keg Polishing, etc... | Youtube Channel
|
|
|
|
|
07-18-2008, 12:24 PM
|
#8
|
|
Senior Member
Join Date: Jun 2008
Location: Madison, WI
Posts: 587
|
Quote:
Originally Posted by mrkristofo
The beta has Batch and Fly sparge options in it, and they function quite well.
|
Part of the problem is that I am new to all-grain so I'm a dunce on the process, the rest of the problem is that I am new to the software.
I don't think the non-beta has fly sparge presets. I'll look into getting the beta. If anyone has a link that would be great. Thanks much for all your help. |
|
|
|
|
07-18-2008, 01:42 PM
|
#9
|
|
Senior Member
Join Date: Aug 2006
Location: Piscataway, NJ
Posts: 19,424
|
You can't get into the beta program anymore, it's just about over.
However, the older version is actually focused on fly sparging. Here's how you setup a preset that you can later tweak:
__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!
Personal Website, All Grain Primer, Keg Polishing, etc... | Youtube Channel
|
|
|
|
|
07-18-2008, 04:15 PM
|
#10
|
|
Senior Member
Join Date: Jun 2008
Location: Madison, WI
Posts: 587
|
Quote:
Originally Posted by Bobby_M
You can't get into the beta program anymore, it's just about over.
However, the older version is actually focused on fly sparging. Here's how you setup a preset that you can later tweak:
|
Thanks much Bobby.
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
|
|
