Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Brewing Software (http://www.homebrewtalk.com/f84/)
-   -   Beersmith mash tun set up? (http://www.homebrewtalk.com/f84/beersmith-mash-tun-set-up-132215/)

claphamsa 08-14-2009 02:50 PM

Beersmith mash tun set up?
 
I have 2 10 Gallon coolers for mash tuns, any one have any idea how to set this up in beersimth?

hcarter 08-14-2009 04:07 PM

When you open up Beersmith, if you look down the left hand side you'll see a tab for "Equipment." Click on that and then click on "My Equipment." You'll have to go through some other steps once you click on that, but you should be able to figure it out. Hope this helps.

claphamsa 08-14-2009 04:12 PM

I got that far, I just cant figure out how to have it split the mash and sparge :(

Lil' Sparky 08-14-2009 04:14 PM

It does it for you. You tell it what your losses are, what your final volume target is, what your mash thickness is, and it'll compute how much sparge water you'll need. Is that what you're looking for?

claphamsa 08-14-2009 04:20 PM

well i see how to set it up with a 15.5 G kettle and a 10 G cooler, but i have a 15.5 G kettle and 2 10 G coolers, for the bigger mashes....

Lil' Sparky 08-14-2009 04:25 PM

Ah, I see. I thought you meant 1 for MLT, 1 for HLT. I don't know that Beersmith has the capability to run mash profiles for simultaneous mashes using 2 tuns. My guess is you'll just need to split the grain bills and enter two different mashes/sparges using 1/2 of your target volume for each. Make sense?

claphamsa 08-14-2009 04:38 PM

that's the plan, but for example im making a wee heavy on sat, and it has me mashing all 42 Lbs of grain at once (no other choice) and 12 different .59 gallon sparges :D

funny, not a big deal, but funny.


All times are GMT. The time now is 01:20 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.