Home Brew Forums > Recipe Database > HomeBrewTalk.com Recipe Database > India Pale Ale > All-Grain - Four Peaks Hop Knot Clone

Reply
 
LinkBack Thread Tools
Old 12-13-2010, 05:42 AM   #1
scottland
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: Chandler
Posts: 2,117
Liked 136 Times on 104 Posts
Likes Given: 12

Default All-Grain - Four Peaks Hop Knot Clone

Recipe Type: All Grain
Yeast: Safale US-05
Yeast Starter: If liquid -- Yes
Batch Size (Gallons): 5.5
Original Gravity: 1.064
Final Gravity: 1.015
IBU: 47
Boiling Time (Minutes): 60
Color: 6.5
Primary Fermentation (# of Days & Temp): 7
Secondary Fermentation (# of Days & Temp): 14
Tasting Notes: Floral, Citrus, clean malt notes, with good balance

Assuming 78% efficiency (adjust grain bill as needed):
10lbs 2-row
3lbs Pale Ale (3.5L)
12oz Crystal 20L
Mash at 150*

20g Magnum @ 90
24g Liberty @ 30
24g Glacier @ 30
24g Simcoe @ 5
24g Cascade @ 5
48g Simcoe @ 0
48g Cascade @ 0
Dry Hop: 48g each of Simcoe and Cascade
For those that are metric challenged, 24g = 0.86oz, and 48g is 1.72oz.

WLP007 Fermented at 62F for the first few days. As soon as it slows down, raise the temp to 65, and continue to raise the temp to 68* until it finishes out. Ignore the US05 in the initial post. It makes an excellent IPA, but it's a little too clean to be Hop Knot. If you can't ferment this beer in the low 60s, use US05.

The recipe looks pretty similar to the one I originally posted. A little less Crystal, a little less bittering, and much more hops in the finish.

If you have a hop back, use it. The 5 minute addition is meant to mimic a whirlpool, and the 0 min to mimic the hop back. I add the whirlpool hops at flameout, whirlpool my wort for 15min, the add the hopback hops right before I kick on the chiller.

Targets: OG: 1.065, FG: 1.013, SRM: 6.5, IBU: 47, ABV: 6.7%

This is a fantastic IPA. Its lighter in color than most, and surprisingly well balanced with since its only 47IBU, but it is extremely floral and citrusy from all the late hop additions. This is a very sessionable beer due to it's balance, but doesn't leave you wishing it was more bitter.

This is the tweaked recipe discussed in post 20-30 or so of this thread. It's dead on, just brew it.

**Updated Photo**

dsc_6308.jpg  
__________________
scottland is offline  
 
Reply With Quote Quick reply to this message
Old 12-15-2010, 08:34 PM   #2
scottland
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: Chandler
Posts: 2,117
Liked 136 Times on 104 Posts
Likes Given: 12

Default


This is an updated photo from the updated recipe. The real Hop Knot and the clone. This photo was taken three days after it was kegged.

dsc_6194.jpg  
__________________
scottland is offline  
 
Reply With Quote Quick reply to this message
Old 01-29-2011, 04:35 PM   #3
megalomani
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
megalomani's Avatar
Recipes 
 
Join Date: Oct 2007
Location: Cincinnati
Posts: 177
Liked 7 Times on 7 Posts
Likes Given: 2

Default


This is not only one of my favorite IPA's but has a special place in the hearts of me and the misses. I at least owe part of the success in our relationship to the balanced, clean, and floral flavors of this IPA.

Early in the relationship with my now wife we made a trip to Arizona and found this brewery. Although she typically does not like highly hopped beer she loved this as much as me and we left the brewery with a growler full and had an almost magical experience in Sedona.

scottland, how do you think this would replicate with Ringwood yeast? Will give it a try since I already have the yeast starter going.

Also are the 0 minute hops the dry hop or just flame out? I am taking the recipe to mean hop addition at flame out and then 2 oz dry hopped. Just want to make sure that I will need 7 oz of hops total.

Thanks for posting, I have been searching for a clone of this for over a year.

__________________
megalomani is offline  
 
Reply With Quote Quick reply to this message
Old 01-30-2011, 03:25 PM   #4
scottland
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: Chandler
Posts: 2,117
Liked 136 Times on 104 Posts
Likes Given: 12

Default


You've got it. I Loved hop knot as well because it isn't nearly as bitter as most. IPAs, but it's extremely hoppy in it's nose. Four peaks once said in a newsletter mow many hops per barrel they use for hop knot, I scaled that down to 5gl, which got me here. 0min additions are flameout additions. If you have an extremely fast wort chiller, let them steep a little, as four peaks uses a hop back. If you have a simple immersion chiller, just add at 0min, and start chilling right away. I think ringwood would work fine, anything with that British flavor will get very close. FYI, this recipe is written for 82% efficiency and 6.4%ABV. Hop knot is 6.0, I added a little extra 2-row for a little more alcohol. If you get 75%, leave the recipe as is, but if you get 80%+ cut back the 2-row a little so your OG is around 1.060-1.062. Good luck

__________________
scottland is offline  
 
Reply With Quote Quick reply to this message
Old 05-19-2011, 06:15 AM   #5
scottland
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: Chandler
Posts: 2,117
Liked 136 Times on 104 Posts
Likes Given: 12

Default


Well I've brewed this two more times since posting this recipe, and I had some actual hop knot tonight, and I can tell you this recipe is pretty dead on. Super small differences. Side by side the color is near identical, the real thing is about 1SRM lighter. Possibly 2oz less crystal would get the clone there, but I'm not sure it's worth the trouble to try it. Hop Knot is definitely a little lower in OG, and a little drier as well. I'd guess FG around 1.012 or 1.013 or so. If you want an exact clone, use the recipe above, and if you get 75% efficiency, you should be dead on.

The aroma is dead on, as hop knot is definitely hopped with Simcoe and cascade. Four peaks definitely utilizes a hop back, so if you wanted the beer to be identical, you'd need To run it through hop back. But other than that, ya, it's like 95% there. I'm very, very tempted to brew this with WLP007. I'm thinking if kept in the low 60s it could be very close.

__________________
scottland is offline  
 
Reply With Quote Quick reply to this message
Old 06-12-2011, 10:59 PM   #6
megalomani
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
megalomani's Avatar
Recipes 
 
Join Date: Oct 2007
Location: Cincinnati
Posts: 177
Liked 7 Times on 7 Posts
Likes Given: 2

Default


I have made this recipe twice now (once using S-05 and another using ringwood ale). One is on tap now, but in my haste I don't remember if its the one with ringwood or S-05.

Only had enough simcoe to dry hop the first batch. Will have to use all cascade for the other batch unless I can find some simcoe real soon.

I must say this is a damn good clone. Was just in AZ again this past May and made the obligatory visit to Four Peaks. Dry hopped batch one when arrived home and had a drink a few days later. The taste is pretty close as well as I remember. Wish Four Peaks distributed out east so I could compare side by side.

This will be in my regular spring/summer rotation. Thanks again for the recipe.

__________________
megalomani is offline  
 
Reply With Quote Quick reply to this message
Old 06-13-2011, 03:56 PM   #7
scottland
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: Chandler
Posts: 2,117
Liked 136 Times on 104 Posts
Likes Given: 12

Default


Ya, Four Peaks said they won't distribute outside of Arizona until their sales stop growing by leaps and bounds in AZ. Makes sense. On the bright side, they now sell Hop Knot in cans, so you can take some home with you!!

Ringwood was probably the closer clone. I really like the beer made with US-05, but Hop Knot definitely has some subtle English esters. Ringwood, S-04 or WLP007 would probably be damn close. I think I'm going to try WLP007 here soon.

On a third note, Four Peaks updated the chalk board at the brewery saying that Hop Knot is now 6.7% ABV. The cans say 6.7% ABV, and the website says 6.7%. Safe to say, it's now 6.7%. To adjust the recipe just add more two row or pale malt to get the OG to 1.066-1.067 (this will depend on your brewhouse efficency. For me at about 80%, that means an extra pound 2-row). Shoot to finish around 1.014-1.015.

__________________
scottland is offline  
 
Reply With Quote Quick reply to this message
Old 08-02-2011, 09:07 AM   #8
CrossroadsBrewingCo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Scottsdale
Posts: 4
Default


Thank you for posting Scottland!!! This has become my favorite ipa recently. Just a few questions:

1. Your recipe indicates 3 lbs pale ale. I'm plugging this into beer smith and pale ale isn't listed. Maybe I just don't understand the short hand ( if any used). Is this grain or donu mean pale liquid extract? I know thisnis an all grain recipe. Just looking for some clarification.

2. I know four peaks uses reverse osmosis water then adds proper minerals/ salts. Any insight into those mineral stats? I'm guessing I should match water in England.

3. Also, I'm planning on using irish moss. Not listed in the recipe but I'm guessing this was presumed?

4. Any ideas for 8th street ale clone? haven't even looked yet for one but I love that brew

5. Doesn't it make u mad that hop knot in cans goes for 17.99 per 12 pk at total wine for a locally brewed beer? I know ipa 's r more expensive but wow! I get modus hoperandi from colorado for 7.50 a six pack and they use almost twice the hops per batch! Just throwing it out there.

Thanks again for the post. Much appreciated!!

__________________
CrossroadsBrewingCo is offline  
 
Reply With Quote Quick reply to this message
Old 08-03-2011, 05:01 AM   #9
scottland
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: Chandler
Posts: 2,117
Liked 136 Times on 104 Posts
Likes Given: 12

Default


1. Pale Ale malt is a slighty more toasted pale malt(2row). It's like 3-4L. ESB malt or marris otter is a sub. Brewers connection has Pale ale malt. At the end of the day, it's not super critical to the recipe, but side-by-side you'd notice the difference.

2.RO water is definitely the way to go in Metro Phoenix. The water is too variable not to. Sometimes it's perfect for brewing, sometimes it's awful, and it's always full of chlorine. Use RO water, and add 2tsp calcium chloride and 1tsp gypsum for every 5gal of water treated. Add 2% acid(acidulated) malt to the grain bill, so about 4oz. (this water profile is for an IPA)

3. Irish miss is perfectly fine. Whirlfloc is also great. I try to always use one of the two.

4. I'm working hard on an 8th street clone, that one is tougher than I thought it would be. It's got a little sweetness to it, and lots of hop flavor. They call it a best bitter, but I think it's closer to an ESB. I'll be taking a third shot at it soon. PM me if you want my work in progress recipe

5. I'm with you, it's pricey, but I love it.

6. Yeast choice: if you can control ferment temps, use WLP007, pitch a 2QT starter, and ferment at 62-64*. If you don't have great temp control, use Safale US05. Its a subtle difference in the beer, but US05 is more temperature tolerant.

No worries on the recipe, I just try to help out where I can. Lord knows this forum has given me more help than I can pay back.

__________________
scottland is offline  
 
Reply With Quote Quick reply to this message
Old 08-04-2011, 10:29 AM   #10
CrossroadsBrewingCo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Scottsdale
Posts: 4
Default


Thanks Scottland. Great advice. Very precise. I'm gonna keep an eye out for your 8th street recipe. I've got a few batches on deck and won't be able to attempt it for a while.

__________________
CrossroadsBrewingCo is offline  
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
All-Grain - Mad Hatter IPA Clone ohiodad India Pale Ale 25 07-14-2014 07:25 AM
All-Grain - Furious Clone? jackson_d India Pale Ale 65 01-11-2014 01:32 AM
All-Grain - Avery IPA Clone tborgman India Pale Ale 8 04-24-2011 02:03 PM
Extract - Diamond Knot Clone orj India Pale Ale 0 08-31-2010 05:32 PM
Harpoon IPA clone piperkeith India Pale Ale 0 05-03-2007 07:16 PM



Newest Threads

LATEST SPONSOR DEALS