Six Shooter Pale Ale (AG, 4.5%, Late Addition Only)
A few months ago I had a discussion with some fellow HBTrís about the idea of exclusive late-hop-additions in a beer. The purpose being to derive as much flavor and aroma out of the hops as possible, without over bittering the beer.
Iím a growing fan of hoppy beers, but not a fan of waiting months for an aggressive bitterness to die down in an APA (or IPA for that matter) before itís drinkable. There are a fair number of hops out there that provide some pretty decent nose to a beerÖ but the AAUís are so high that they are often relegated to their designated purpose of bittering, thereby limiting their potential contribution to flavor and aroma. Hops like Nugget, Phoenix, Galena, Summit and others have a fantastic aroma out of the bag, but are down right dangerous with their high bittering potential.
Enter the idea of back-loading the entire hops bill. The idea is to add the entire hops bill with less than 20-minutes left in the boil. This achieves the desired IBUís, but more importantly, gets the flavor and aroma out of those hops that might otherwise be lost in a 60-minute boil.
I put together this recipe back in January and the entire ten-gallon batch is nearing the end. I call it Six-Shooter because of itís 6 different grains and 6 different hops additions. (The fact that itís a 1.046 OG and a 36IBU is purely coincidence :D)
This was a fantastic pale ale. Donít let the lower IBUís fool you. This beer was hop-nirvana. But again, not so bitter as to be overly assertive. It took a bit more hops than normal since you have to increase the amount to achieve the target IBU, but every ounce of those hops was present and accounted for when it came to flavor and aroma.
At 4.5%, this was a nice malty beer and everything youíd want in a hoppy ale. If youíre short on the typical ďCĒ hops but have a stash of high AAUís laying around, give something like this a try and youíll be pleasantly surprised.
Batch Size: 11.75 gal
Boil Size: 14.55 gal
Estimated OG: 1.046 SG
Estimated Color: 9.2 SRM
Estimated IBU: 36 IBU
Brewhouse Efficiency: 72.0 %
Boil Time: 60 Minutes
14.00 lb Pale Malt, Maris Otter (3.0 SRM)
2.00 lb Munich Malt - 10L (10.0 SRM)
2.00 lb Vienna Malt (3.5 SRM)
1.00 lb Caramel/Crystal Malt - 40L (40.0 SRM)
1.00 lb Caramel/Crystal Malt - 60L (60.0 SRM)
0.50 lb Cara-Pils/Dextrine (2.0 SRM)
1.25 oz Nugget [11.00%] (20 min)
1.00 oz Summit [16.50%] (15 min)
1.00 oz Galena [13.00%] (10 min)
1.00 oz Phoenix [12.00%] (1 min)
1.00 oz Amarillo Gold [8.90%] (1 min)
1.00 oz Cascade [7.80%] (1 min)
After knockout, let steep for 10 minutes.
1 Pkgs SafAle English Ale (DCL Yeast #S-04) Yeast-Ale
Dry hop each 5-gallons with 1-ounce (Brewers Choice, I used Mt Hood)
Reminds me of this one
Which is very good BTW
Lots of hop bouquet without the harshness.
Try my Fat owl Ale, based on one of his beers. The steeping at 180f really brings out the flavor.
I do let mine steep for about 10 minutes, but right at flameout with no temperature drop.
Maybe next time I'll turn on the tap for the IC and let her chill for 5 minutes and then let it sit for 15-20 minutes.
I do like to steep my dry hop hops in 150 degree water for 1/2 an hour before adding to the secondary.
|All times are GMT. The time now is 07:01 PM.|
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.