Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   DIY Projects (http://www.homebrewtalk.com/f51/)
-   -   Yet another Keezer project (http://www.homebrewtalk.com/f51/yet-another-keezer-project-272110/)

kscaglio 10-02-2011 12:49 AM

Yet another Keezer project
Quick question. I'm building a keezer and am getting ready to drill into the collar for the shanks. What size bit should I use? Thanks for any help.

kscaglio 10-02-2011 12:51 AM

PS I did search this but I keep seeing 3 or 4 different sizes from 3/4 to 1 inch

day_trippr 10-02-2011 02:20 AM

Standard beer shanks use a 7/8" x 14 thread and will fit through a 7/8" diameter hole with a snug fit. If you want a bit of slop, go with an 15/16", but if you already have a 1" bit and don't want to buy a bit you may never use again, that'll work...


kscaglio 10-02-2011 02:27 AM

Many thanks, went ahead with the 7/8ths bit and it worked perfect. Just poured my first beer from my keezer...delicious I'll post pics later, I made a Cardinal keezer, hopefully they will fare a little better tomorrow night.

All times are GMT. The time now is 04:48 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.