Update: 3/5/2010
Its been several days since Ive had time to do any work toward the stand. But the last two days the wife has been kind enough to allow me some time to work on it. She watched our two small sons while I got to play in the basement.
Several mods to the stand. I added some more square tubing to the top. It help keep the keggles from falling into the square. Not that the square was too big or anything. But I needed to center the kegs with about a inch or so on all sides or one of the sides of the keg would fall a little into the square. This added tubing solved that small problem. Which really wasn't an issue or problem in the first place, Just piece of mine.
I also added and other piece to one of the sides. This is going to support my water filter. Remember the stand will have casters. This gives it another 5" of clearance from the ground.
Also got to grind down the welds and strip off some of the coating before the painting took place.
Still need to find a way to mount my two banjo burners. Ive been thinking on several different methods. I'm at the planning stage on them at the moment.
Linear Mode
