ACo

Recipes 

I went to home depot today to get the stuff to make a MLT using the specifications from FlyGuy...however they didnt have a 3/8" threaded ball valve...only 1/4" and 1/2"....


So i was wondering if there was a good way to convert or make an adaptor to either one of those sizes....

Thanks!

__________________
802 Brew

Primary 1: Empty :(
Primary 2: Empty
Primary 3: Empty
Primary 4: Empty
Bottled: 802 AIPA (6% abv), Dunkelweizen (6.6% abv), EdWort's Apfelwein (8.5% abv), Centennial IPA (6.2% abv), 802 House Honey Pils Pale Ale (3.2% abv), 802 100IBU IIPA (7.7% abv), 802 Magnum/Centennial IPA (6.0% abv), 802 Honey Cream Ale (6.0% abv), Bourbon Breakfast Stout (7% abv)

mbird

Recipes 

You can get a 1/2 pipe thread to 3/8 compression adapter. The 3/8 section runs through the kettle and a section of copper tubing for a pick-up tube is attached using a slip/compression sleeve and nut.
mark
Beer Diary...
Brew School Home Pg1

ACo

Recipes 

so....in lay man's terms, get a 3/8" to 1/2" adaptor to fit on the 1/2" threaded ball valve? will that affect the output flow?

__________________
802 Brew

Primary 1: Empty :(
Primary 2: Empty
Primary 3: Empty
Primary 4: Empty
Bottled: 802 AIPA (6% abv), Dunkelweizen (6.6% abv), EdWort's Apfelwein (8.5% abv), Centennial IPA (6.2% abv), 802 House Honey Pils Pale Ale (3.2% abv), 802 100IBU IIPA (7.7% abv), 802 Magnum/Centennial IPA (6.0% abv), 802 Honey Cream Ale (6.0% abv), Bourbon Breakfast Stout (7% abv)

KYB

Recipes 

I used a 1/2" ball valve, some O-rings, and 7/8" SS washers.

MikeG

Recipes 

I had the same problem so went to Lowes where they had them.

Captain_Bigelow

Recipes 

+1. To make mine I had to go to Home Depot, Lowes, True Value Hardware and Fastenal in order to get all the parts. In hindsight I wish I just purchased a pre-assembled kit from somewhere like bargain fittings. I ended up spending about $30 on the hardware - $6.30 of that was on the x4 5/8" washers from Fastenal.

Also, remember to go to Lowes for the steel braid. Home Depot doesn't sell stainless steel. I think it was some other kind of metal which includes zinc.

jkarp

Recipes 

I've about had it with HD. I was originally pissed at Lowe's for buying out Eagle's (which I loved), but now I'm finding Lowe's has a much better brass selection and consistently lower prices than HD.