Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Very Simple Immersion Wort Chiller

Reply
 
LinkBack Thread Tools
Old 07-08-2010, 11:14 PM   #1
Erythro73
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Montreal
Posts: 265
Likes Given: 1

Default Very Simple Immersion Wort Chiller

Hi folks,
I've built a very simple Immersion Wort Chiller. I start a thread on it here because... well, it may help someone like me who's not close to be a good handyman. I tried following a lot of designs and instructions, but every one failed me at some point. Some lacked instructions, some used soldering which I don't know how to do properly, and well... for others, I just couldn't find the parts.

Every parts were bought at Home Depot. It doesn't require any soldering nor special equipments. The plumbing parts are all of the brand Watts, which I think is available in every Home Depot in Canada and US as a standard.

I only do small batches (2.5 gallons), that's why I didn't buy a bigger/longer copper tube!

- 20' of copper tubing 3/8"
- 20' of vinyl tubing 3/8" (could be shorter, depending of the need...) which I splited in two.
- Adapter to hose
- 1 Watts A-660 Swivel Hose Adapter (3/4" FH x 1/2" FIP)
- 1 Watts A-828 Pipe Hex Bushing (1/2" MIP x 3/8" FIP)
- 1 Watts A-294 Hose Barb Adapter (3/8" Barb x 3/8" MIP)
- Teflon tape
- 5 hose clamps
- (Optional) Tube Bender

First, I wrapped the copper tube around a smaller pot than the one I use to brew. I used only my hands for everything:


Then, I made the two ends of the copper tube come out of the top. I did it by hand, without tube bender. I just did it very slowly/carefully as to not put any undesirable kinks on my tube. Taking the lowest end of the tube and bringing it to the top with the other end is the trickiest part, but it's doable without soldering (to put an elbow). The one that begins the coil is the "WATER in" (highest one)and the one that ends the coil is the "WATER out" (lowest end). It's ugly as hell, it would probably have been better with the tube bender... but hey, it's simpler this way!



View of the interior :




The 4 plumbery parts go one in another (I put Teflon tape in every connection) (in order: Adapter to hose--Watts A-660--WattsA-828--Watts A-294) which fits into the first half of the vinyl tubing. Everything is held by hose clamps.



The first half of the vinyl tubing goes onto the "WATER in" part of the chiller while the other half of the vinyl tubing goes from the "WATER out" into the sink.



End product:



(Yeah, I really should've put a shirt... but it's too hot outside...)

P.S. My WATER in and WATER out are this high because I plan on using another kettle soon! So I took the measurements...

__________________

Last edited by Erythro73; 07-09-2010 at 01:56 AM.
Erythro73 is offline
 
Reply With Quote Quick reply to this message
Old 07-08-2010, 11:50 PM   #2
klyph
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: North Pole, Alaska
Posts: 1,809
Liked 38 Times on 34 Posts
Likes Given: 3

Default

I way overcomplicated mine with flare fittings and hose barbs. Looking back, I should've just slipped the tube over the copper like you did.

__________________
10 gallon electric system
Stovetop 110v single vessel 5 gallon system

Primary: saison
Secondary: nada
Conditioning: macaroon stout
Drinking: store bought
klyph is offline
 
Reply With Quote Quick reply to this message
Old 07-08-2010, 11:50 PM   #3
ScubaSteve
Feedback Score: 0 reviews
 
ScubaSteve's Avatar
Recipes 
 
Join Date: May 2007
Location: New Bern, NC
Posts: 3,674
Liked 61 Times on 46 Posts
Likes Given: 11

Default

Perfect. Simplicity is a beautiful thing.

__________________
ScubaSteve is offline
 
Reply With Quote Quick reply to this message
Old 07-09-2010, 12:24 AM   #4
dougf
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Posts: 211
Liked 2 Times on 2 Posts
Likes Given: 1

Default

Indeed! I like it and may use this in the near future... I like it.

__________________
dougf is offline
 
Reply With Quote Quick reply to this message
Old 07-09-2010, 01:59 AM   #5
Erythro73
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Montreal
Posts: 265
Likes Given: 1

Default

Glad you guys like this, despite it being so ugly compared to those sold on ebay or on online homebrewing shops!

__________________

Last edited by Erythro73; 07-09-2010 at 02:03 AM.
Erythro73 is offline
 
Reply With Quote Quick reply to this message
Old 07-09-2010, 03:55 AM   #6
tcory77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Oklahoma
Posts: 179
Liked 3 Times on 3 Posts

Default

awesome!!! my tap water is getting pretty warm right now and i am brewing this weekend, so i am going to take your approach and make a pre-chiller for my IC. I have a feeling it will look something like your chiller, or at least i hope. It should get my water temp down enough, we will see. Thanks for posting. I too appreciate the simplicity.

cheers.

__________________
tcory77 is offline
 
Reply With Quote Quick reply to this message
Old 07-09-2010, 11:25 AM   #7
TheBroonery
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Gaithersburg, MD
Posts: 370
Liked 5 Times on 4 Posts
Likes Given: 3

Default

Nice! Similar to what I did, however I used the old rubber supply hoses from my washing machine, cut one end off and clamped it to the copper tubing, and found an adapter that goes from kitchen sink thread, to garden hose/utility sink/washing machine thread, and wala! The old rubber hoses are nice with the utility sink downstairs when cleaning carboys, buckets, etc. Infact if the hoses on your washing machine are more than 5 years old, upgrade them to the braided stainless steel kind that won't burst, and utilize the old rubber ones for beermaking! Also I should mention I used a 1 gal paint can to bend my copper tube around.

__________________
TheBroonery is offline
 
Reply With Quote Quick reply to this message
Old 07-09-2010, 04:59 PM   #8
Bret86944
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Cincinnati
Posts: 64
Default

Ugly? If it's simple and it works then it's beautiful

__________________
Bret86944 is offline
 
Reply With Quote Quick reply to this message
Old 07-09-2010, 05:21 PM   #9
machinelf
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: Cairo, WV
Posts: 317
Liked 10 Times on 9 Posts
Likes Given: 117

Default

Looks great! And what a difference a chiller makes.

__________________
machinelf is offline
 
Reply With Quote Quick reply to this message
Old 08-12-2010, 12:56 AM   #10
chask31
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2006
Location: New York
Posts: 295
Liked 3 Times on 3 Posts
Likes Given: 1

Default

Dare I ask what something like this costs? Seems like a good project for me to get under my belt.

__________________

Tap #1: Cucumber Honey Wheat Ale
Tap #2: Rye Ale
Primary #1: empty
Primary #2: empty
On Deck: Wit

chask31 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Simple Immersion Wort Chiller Schlenkerla DIY Projects 120 02-22-2013 04:07 AM
My new immersion wort chiller ramz7887 DIY Projects 1 07-12-2009 08:57 PM
Is it worth the trouble to make own immersion wort chiller? marubozo DIY Projects 36 07-08-2009 02:43 AM
New immersion chiller ghack DIY Projects 6 02-16-2009 10:34 PM
Counterflow/immersion wort chiller SenorWanderer DIY Projects 9 08-11-2007 03:07 PM



Newest Threads