The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > DIY Projects > Very Custom Kegerator Idea....??

Reply
 
LinkBack Thread Tools
Old 12-19-2012, 06:04 PM   #1
YankeesHomeBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2012
Location: Shippensburg, PA
Posts: 38
Likes Given: 4

Default Very Custom Kegerator Idea....??

So I am building a huge mancave in the basement with a bar that will fit 10-12 people. Needless to say, it will be a big bar...
Behind the bar I want to put a Kegerator converted from a chest freezer on the back wall with 4 taps. The idea is to build a counter top on the lid and hide the freezer behind a set of counter high doors. It would then blend right into the counter top on the back wall.

The big kicker is the custom taps I want to build. I want to mount 4 5L oak barrles on top and have faucets coming out of the heads (one faucet per barrel). The barrels are 10" long, 8 1/4" diameter, and 7" diameter head. I think this would be relatively easy (famous last words...), just mount the barrels, drill through the bottoms and feed the lines through to a shank on the head of the barrel. I have been searching and searching and haven't found anyone that has done this yet...

Any ideas? Pointers? Thoughts? Problems? Has anyone tried this yet?

__________________
YankeesHomeBrew is offline
 
Reply With Quote Quick reply to this message
Old 12-19-2012, 07:14 PM   #2
SpookyAlmond
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2012
Posts: 53
Liked 5 Times on 3 Posts
Likes Given: 3

Default

That sounds awesome! I would consider insulating the inside of the barrels. Warm lines = FOAM. Good luck.

__________________
SpookyAlmond is offline
 
Reply With Quote Quick reply to this message
Old 12-19-2012, 09:51 PM   #3
purplehaze
HBT_SUPPORTER.png
Feedback Score: 2 reviews
 
purplehaze's Avatar
Recipes 
 
Join Date: Mar 2011
Location: , Massachusetts
Posts: 311
Liked 13 Times on 13 Posts
Likes Given: 4

Default nice idea

I like the idea of the separate barrels on top with a tap coming out of each one especially if it looks like its part of the bar.

I did something similar but different in my no fans keezer build.

Things to keep in mind while building it:
Make sure you can check for leaks and replace the lines.
90 degree tails on the shanks will prevent kinks in the lines.
Insulation is a must.
Depending on how you incorporate the barrels you may have to drill and bolt each stave to the trim rings so they don't fall apart.

Looking forward to the finished product and always remember to post pics.

purplehaze is offline
 
Reply With Quote Quick reply to this message
Old 12-19-2012, 11:32 PM   #4
YankeesHomeBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2012
Location: Shippensburg, PA
Posts: 38
Likes Given: 4

Default

I love the 90 degree angle idea, I didn't think about that. That's perfect
What did you use to insulate your lines?

And im not following why the barrel would fall apart?

__________________
YankeesHomeBrew is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2012, 12:18 AM   #5
fall-line
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
fall-line's Avatar
Recipes 
 
Join Date: Mar 2011
Location: Seattle, WA
Posts: 433
Liked 49 Times on 35 Posts
Likes Given: 14

Default

It sounds like you have a great bar in your future! One thing to consider in the ability to open the lid of the freezer when its up against your back wall to change kegs, etc with those large barrels on there

__________________

"Brewing beer is a fun and rewarding hobby. When you do good, you get beer. When you do bad, you get beer. It's a lot like rec league softball"
(source)


Building a home brewery (and garage) from the ground up
fall-line is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2012, 03:25 AM   #6
purplehaze
HBT_SUPPORTER.png
Feedback Score: 2 reviews
 
purplehaze's Avatar
Recipes 
 
Join Date: Mar 2011
Location: , Massachusetts
Posts: 311
Liked 13 Times on 13 Posts
Likes Given: 4

Default barrels

Never mind, I was just remembering how much of a pain incorporating the barrel was on mine. It's something I had to do because I cut the trim rings and added a hinge so the barrel would open like a clam.

I used 1/2" copper pipe around the lines which extended down into the freezer to keep them cool. I then covered the copper with pipe insulation and filled the bottom half of the coffin with expanding foam. The top half was filled with styrofoam packing peanuts.

purplehaze is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2012, 11:40 AM   #7
YankeesHomeBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2012
Location: Shippensburg, PA
Posts: 38
Likes Given: 4

Default

Quote:
Originally Posted by fall-line View Post
It sounds like you have a great bar in your future! One thing to consider in the ability to open the lid of the freezer when its up against your back wall to change kegs, etc with those large barrels on there
The freezer will be on a "cart" if you will. I'm attaching 2X10's together and putting casters on them for the freezer to sit on. That way the freezer can roll out from the wall. I'm also thinking about using shocks (like for liftgates on a Tahoe) to keep the lid open with the extra added weights


PurpleHaze- I'd really like to see come pictures of what all you did using barrels! It excites me that someone else has incorporated barrels as well. I like the hinge idea so that the barrels can open for easy access, but that seems to be a lot more work. Do you have any pictures you can post???
__________________
YankeesHomeBrew is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2012, 11:46 AM   #8
heckels
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Sioux Falls, SD
Posts: 674
Liked 43 Times on 35 Posts

Default

There was a kitchen show on HGTV in which they cut the top 4-6 inches of the barrel off, hung it on the wall and had a tap coming out the front (top of the barrel).

__________________
heckels is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2012, 11:47 AM   #9
BadNewsBrewery
Basement Brewer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
BadNewsBrewery's Avatar
Recipes 
 
Join Date: Oct 2012
Location: Severn, MD
Posts: 1,065
Liked 108 Times on 89 Posts
Likes Given: 36

Default

I've seen something like this used before. It would be wall mounted and not counter top mounted like you may be going for, but with an open back you'd easily be able to troubleshoot any leaks and add insulation.

__________________
Building a Bad News Brewery - eHERMS

2014:
5gal Scottish Wee Heavy
5gal Saison
15gal American Pale Ale
20gal Belgian Wit (10 dumped)


Keg 1: Apfelwein
Keg 2: Belgian Wit (Failure)
Keg 3: American Pale Ale
Fermenting: Belgian Wit (Take 2)
BadNewsBrewery is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2012, 03:53 PM   #10
purplehaze
HBT_SUPPORTER.png
Feedback Score: 2 reviews
 
purplehaze's Avatar
Recipes 
 
Join Date: Mar 2011
Location: , Massachusetts
Posts: 311
Liked 13 Times on 13 Posts
Likes Given: 4

Default barrels

YankeesHomeBrew, I don't want to step on your thread by posting pics of my keezer here. You can find the link to my build thread at the bottom of my posts in "purple" type. The one with the barrel is the "no fans" one.
Others have used shocks for the lid with varying success. I thought of using them (but never did) and even went to the junk yard a few times. There are so many weight capacities and sizes that the easiest way for ME to get it to work would be to just get them and adjust my build early on. How would you use the shocks? To open the lid from the closed position or to assist and hold it open while you work inside, the later seems the best solution. Either way you could use a fish scale to hold the lid open at the angle you want to approximate the weight.

If you want them to open the lid when closed you would have to figure out a way to latch or lock the lid down.

Using them to hold the lid in the open position would certainly take less pressure.

__________________
My single tier rig
No fans keezer build
Second Keezer for lil brother
Third keezer in progress
Tap handles
Pinlock 0-ring sizes
Pot Skirt
purplehaze is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Custom Large Hop Sack idea? mikefromcu Equipment/Sanitation 2 06-08-2010 01:47 AM
Custom Size kegerator Torg Equipment/Sanitation 0 05-10-2010 07:15 PM
The Perfect Custom College Kegerator robbdmc Bottling/Kegging 9 08-21-2009 06:24 PM
Custom Kegerator help! Cranford803 Equipment/Sanitation 2 05-13-2009 03:18 AM
My Custom Kegerator DG Paul Equipment/Sanitation 7 04-17-2007 02:00 PM