*Ss Brewing Technologies Giveaway - Enter Now!*

Home Brew Forums > Home Brewing Beer > DIY Projects > Sweating Pipes
Reply
 
LinkBack Thread Tools
Old 03-17-2008, 10:59 AM   #31
CEMaine
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2007
Location: Cape Elizabeth, Maine
Posts: 142
Default

Quote:
Originally Posted by JnJ
Actually, the valve is above the pickup tube so I have to rely on vacuum to get all the water out which requires the pipe joints be sealed.
Hmmm. That kind of makes sense.

Still it seems to me that if the whole rig is under the mash bed there should not be a problem. Also, as it is suction and not pressure, the need for soldering still seems pretty slim to me.
__________________
The Brewhouse at Alewife Cove

No matter how much I miss my target, I still make beer.
DBM


Primary 1 - Nada
Primary 2 - Zip
Secondary 1 -
Secondary 2 - Ocean House Coffee Porter
Kegged - Iron Clad Pale Ale Cascade 2011
Bottled -
Drinking - Oak Pond Somerset Lager, October Fest & Nut Brown. Ocean House Coffee Porter. Iron Clad Pale Ale Cascade 2011.
CEMaine is offline
 
Reply With Quote Quick reply to this message
Old 03-17-2008, 11:33 AM   #32
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,043
Liked 993 Times on 662 Posts
Likes Given: 28

Default

It's not really that slim. As the wort/water level drops below the topmost slip joint, the tendency to pull air is high due to the siphon being created by the outflow.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 03-17-2008, 12:52 PM   #33
JnJ
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2006
Location: San Antonio, Texas
Posts: 835
Liked 3 Times on 3 Posts

Default

Quote:
Originally Posted by CEMaine
Hmmm. That kind of makes sense.

Still it seems to me that if the whole rig is under the mash bed there should not be a problem. Also, as it is suction and not pressure, the need for soldering still seems pretty slim to me.
This is a Hot Liquid Tank, not a Mash Tun. There is no mash bed.
__________________

Töpperwein Brewery

JnJ is offline
 
Reply With Quote Quick reply to this message
Old 03-17-2008, 12:53 PM   #34
JnJ
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2006
Location: San Antonio, Texas
Posts: 835
Liked 3 Times on 3 Posts

Default

Quote:
Originally Posted by Bobby_M
It's not really that slim. As the wort/water level drops below the topmost slip joint, the tendency to pull air is high due to the siphon being created by the outflow.
Exactly, again, there is no mash, just water, so a leak at the first joint would allow the pump to pull air which is easier than water.
__________________

Töpperwein Brewery

JnJ is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
sweating pick up tubes ebhomey Equipment/Sanitation 1 10-10-2007 08:19 PM
Lauter pipes? SpecialEd All Grain & Partial Mash Brewing 10 03-11-2007 04:24 AM
Carboy Sweating voodoochild7 Beginners Beer Brewing Forum 3 11-04-2005 05:09 PM