Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Stirplate w/ 3speed fan
Reply
 
LinkBack Thread Tools
Old 03-03-2012, 07:00 PM   #1
SecretBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: San Diego
Posts: 45
Liked 4 Times on 4 Posts

Default Stirplate w/ 3speed fan

I thought I would share this with you all, since I was excited to find a fan with a speed switch already on it. I found these supplies at a local electronics store, FRY's. I believe there are several of them around but I'm sure you could find these fans anywhere.

As you can see I was inspired by those using the 120mm fan as the base. I wanted something low profile cheap and sturdy. This is what I came up with.

Antec 3 speed 120mm fan
Plexiglass top for a nice wide, sturdy base, that's easy to clean.
Coupled with a 300ma Universal Ac Adapter (1.5v-12v)

This was way easier to put together than I anticipated since I was prepared to wire a potentiometer and power switch. The fan was $12.50 and the power supply was $9.99. I works great and would even work with a regular 5-7v DC adaptor. The Universal adaptor is pretty cool, I can run the fan well slower than I would ever need to fast enough to move a gallon jug easy. With this setup I have over 12 working speeds and all the wiring I had to do was splice wires from adapter to the fan.

Just thought I would share this since I am very happy with the outcome and the price.

main.jpg   dsc_0042.jpg  
__________________
SecretBrew is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2012, 07:03 PM   #2
thargrav
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Huntsville, Alabama
Posts: 821
Liked 38 Times on 35 Posts
Likes Given: 2

Default

Do you have a picture? Also, what are the three speeds?

__________________
thargrav is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2012, 07:23 PM   #3
SecretBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: San Diego
Posts: 45
Liked 4 Times on 4 Posts

Default

Pics up! The speeds on the fan at 12v are 1200rpm, 1600rmp, 2000rpm. Obviously at the lower voltages it goes alot slower. Im not sure if you can calculate the speed from that but you can easily make a close guess. If you have a ~7v converter that voltage seems about perfect. Then you have a 3 speed stirplate for 12.50.

Also you can see the switch attached to the fan (right side of pic). Its just a simple 3 way low, med, high.

__________________
SecretBrew is offline
 
Reply With Quote Quick reply to this message
Old 05-07-2012, 05:22 AM   #4
jlajr2483
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Location: San Diego, ca
Posts: 53
Default

Where did you get the magnet?

__________________
jlajr2483 is offline
 
Reply With Quote Quick reply to this message
Old 05-08-2012, 03:12 AM   #5
pfi309
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: Bloomingdale, IL
Posts: 39
Likes Given: 1

Default

How did you wire power adapter to fan. Fan has 3 leads and power adapter two?

__________________

pfi309 is offline
 
Reply With Quote Quick reply to this message
Old 05-28-2012, 09:59 PM   #6
SecretBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: San Diego
Posts: 45
Liked 4 Times on 4 Posts

Default

Quote:
Originally Posted by jlajr2483 View Post
Where did you get the magnet?
Sorry, I didn't notice the questions. Anyhow, the magnet is off of a old PC Hard drive. Which works out well with the 1" stir bar and you get two magnets with each drive so you can have a "keeper magnet" so you don't pitch your stir bar. The magnets are very strong, in fact I had to move my base away from the magnets slightly because they seemed to pull on the stir bar too much.

Quote:
Originally Posted by pfi309 View Post
How did you wire power adapter to fan. Fan has 3 leads and power adapter two?
The three leads went to a plastic clip/adapter which had only two leads. This comes with the fan, so i only spliced from those two wires. I just left the clip inline so if I ever want to unclip it for storage or use the DC adapter on another plate i can do so very easily.
__________________
My Beer Blog

My DIY Stirplate
SecretBrew is offline
 
Reply With Quote Quick reply to this message
Old 05-28-2012, 10:07 PM   #7
SecretBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: San Diego
Posts: 45
Liked 4 Times on 4 Posts

Default

I also bought one of these off amazon in the 120mm for another stir plate.
http://www.homebrewtalk.com/f11/buil...er-fan-253254/

It is a little more expensive but it has an awesome looking knob which I plan on mounting on the edge of my plexi. I will let you know how it comes out and what voltages I used.

__________________
My Beer Blog

My DIY Stirplate
SecretBrew is offline
 
Reply With Quote Quick reply to this message
Old 05-28-2012, 10:21 PM   #8
cosmatics
HBT_SUPPORTER.png
Feedback Score: 3 reviews
Recipes 
 
Join Date: Apr 2010
Location: New Jersey
Posts: 248
Liked 18 Times on 18 Posts
Likes Given: 47

Default

Sweet looking setup, I used to live in SD and love Frys. That is a computer superstore! I'm currently making a stir plate and am having a hard time getting my bar to stir properly, did you center your magnet on the fan?

__________________
cosmatics is offline
 
Reply With Quote Quick reply to this message
Old 05-30-2012, 05:33 AM   #9
SecretBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: San Diego
Posts: 45
Liked 4 Times on 4 Posts

Default

It took me a little while but I centered it. I actually used spray adhesive on the magnet, let it dry, then centered it and adjusted it. The spray adhesive actually works really well and will let you move it ever so slightly or even peel it off and re-stick. It has held up well and the magnet hasn't moved at all.

How big is your bar? Mine is 1" I think, it works well and I think i could go up to 1.5 or so, but not bigger. If its not centered properly it will run a little rough and make more noise. If its real bad it will throw the bar.

__________________
My Beer Blog

My DIY Stirplate
SecretBrew is offline
 
Reply With Quote Quick reply to this message
Old 05-30-2012, 02:23 PM   #10
BrewThruYou
Feedback Score: 2 reviews
Recipes 
 
Join Date: Sep 2010
Location: Ambler
Posts: 1,686
Liked 37 Times on 34 Posts
Likes Given: 16

Default

I was going to post that you need more space under the fan to pull air and then realized that we're not after air movement...just spinning the bar.

__________________
BrewThruYou is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
And one more DIY stirplate... -TH- DIY Projects 9 01-03-2012 08:05 PM
DIY Stirplate help chode720 DIY Projects 19 03-02-2011 03:19 AM
Help with DIY Stirplate scsi DIY Projects 18 02-22-2011 05:21 AM
My DYI Stirplate jakecpunut DIY Projects 5 01-25-2011 02:59 PM
Looking for stirplate with plastic box sakeyfour DIY Projects 7 11-17-2010 04:19 PM