Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > SS Braid or Manifold?

Reply
 
LinkBack Thread Tools
Old 04-16-2012, 11:02 PM   #1
WoolyBooger
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Posts: 159
Liked 15 Times on 10 Posts

Default SS Braid or Manifold?

I am ready to get into all grain and I want to build my own MLT. I am going to use a rectangular igloo cooler. I am planning on batch sparing. Should I go with SS braid or a manifold, and why?

__________________
WoolyBooger is offline
 
Reply With Quote Quick reply to this message
Old 04-16-2012, 11:17 PM   #2
MyNameIsPaul
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2010
Location: Houston,TX
Posts: 1,070
Liked 158 Times on 129 Posts
Likes Given: 155

Default

I started with a SS braid. It worked, but I think it was too long (4-5"). It never seemed to get clean. It would flake out grain after being dried. I just recently made a manifold, and I like it a lot better. I don't have to worry about it floating up, and it sucks my cooler dry, virtually zero loss/deadspace.

If you have the tools (or desire to buy some for DIY) I'd go manifold. I learned how to sweat copper pipes. It was fun!

__________________

See one melée of unruly people, and you've seen a maul.

MyNameIsPaul is offline
 
Reply With Quote Quick reply to this message
Old 04-16-2012, 11:21 PM   #3
duboman
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Glenview, IL
Posts: 5,997
Liked 452 Times on 421 Posts
Likes Given: 201

Default

I too started with an as braid but it kept getting crushed and clogged and replaced so this weekend I made a manifold. All the pieces fit very tight together so I did not sweat any joints, it is completely free to be taken apart and thoroughly cleaned. I drilled the holes instead of slotting with a saw. Used it this weekend on a batch and worked like a dream! Sorry I didn't start with one in the first place!

__________________
Nothing Left to do but smile and drink beer.....

The Commune Brewing Company-Perfecting the "art" of beer since 2010
duboman is offline
 
Reply With Quote Quick reply to this message
Old 04-17-2012, 02:04 PM   #4
Cpt_Kirks
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2008
Location: Lakeland TN
Posts: 3,737
Liked 44 Times on 39 Posts

Default

I've been using a SS braid for years. Never had any issues, but I'm always afraid I might crush it when stirring in.

Part of my upgrade to a SS liner for my MLT will be a SS false bottom.

__________________
Cpt_Kirks is offline
 
Reply With Quote Quick reply to this message
Old 05-01-2012, 03:45 PM   #5
chrs7446
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Bangor, Maine
Posts: 7
Default

I started with a SS braid and has the same issues with it floating up (or even coming off completely) and many stuck sparges. I switched to a Bazooka Screen ($11.50 on amazon) and never had any issues since. It stays low, won't get crushed, won't come off, the wort clears after about 2qt vorlaf and I haven't had a stuck sparge yet (even on a 50% rye beer). That said, I'm limited to batch sparging but my efficiency ranges from 72-80%. With the SS braid it was 60-65%.

So if you really want to fly sparge then manifold is the answer, otherwise I'd recommend the bazooka screen.

__________________
chrs7446 is offline
 
Reply With Quote Quick reply to this message
Old 05-01-2012, 04:08 PM   #6
Tinga
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: MN
Posts: 1,158
Liked 36 Times on 28 Posts
Likes Given: 1

Default

a cpvc manifold can be made for a couple bucks and is easy to make cover the entire area of a rectangular cooler. I havent used a ss braid in a mash tun so I can't speak to its effectiveness. it does look simple though.

__________________
Tinga is offline
 
Reply With Quote Quick reply to this message
Old 05-01-2012, 05:22 PM   #7
bknifefight
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: PA
Posts: 1,894
Liked 95 Times on 73 Posts
Likes Given: 37

Default

Quote:
Originally Posted by chrs7446 View Post
That said, I'm limited to batch sparging but my efficiency ranges from 72-80%. With the SS braid it was 60-65%.
I am new to AG but am having a hard time understanding that drastic of a change in efficiency between a braid and bazooka screen. What do you attribute this to? Were you not getting as much wort out of your mash?
__________________
bknifefight is offline
 
Reply With Quote Quick reply to this message
Old 05-01-2012, 05:38 PM   #8
malkore
Feedback Score: 0 reviews
 
malkore's Avatar
Recipes 
 
Join Date: Jun 2007
Location: Nebraska
Posts: 6,922
Liked 32 Times on 30 Posts
Likes Given: 9

Default

SS braid for almost 5 years now, same braid too.

What I have learned from other brewers is that not all braids are created equal. Some of them seem very thin and kink/get crushed. Some are too coarse or too finely woven.
Others, like mine, are great. No issues, ever.
you can put a brass 3/8" plug in the one end which adds weight so it won't float. I think the floaters all just crimped their ends.

Longer isn't better either. I put a really long braid in my 10gal MLT and its a pain. It really only needs to reach to the opposite end of your drain on the MLT.

A manifold definitely benefits from spreading out more over the bottom (i.e. like a false bottom) since it operates in a different way, with fewer 'pores' to let wort run through.

__________________
Malkore
Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10
malkore is offline
 
Reply With Quote Quick reply to this message
Old 05-01-2012, 05:52 PM   #9
cram
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Poway, CA
Posts: 306
Liked 25 Times on 20 Posts
Likes Given: 1

Default

To repeat some of the other posts, I started with a braid and then eventually made a manifold. I like the manifold a lot better for a several reasons: flow rate is improved, it drains just as clear wort, it doesn't float up or get kinked, less dead space on the bottom of the tun, and it comes apart easy. I made mine with a threaded coupler so it screws into the bulkhead and I didn't sweat the side pieces so it can come apart when it's removed but not in the tun.
A braid is a good way to start because they're easy and cheap to build--I liked the T-fitting off the bulkhead and a braided loop around the tun--but the manifold can be built in a night or two if you have a torch to sweat fittings and a dremel to cut the slits. I found the dremel with a cutting disc to be way easier than a jigsaw--and there's no way I'd consider doing the slits with a hacksaw.

__________________
cram is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools