Electric Brewing Supply 30A BCS Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > recirculation issues........
LinkBack Thread Tools
Old 10-10-2012, 01:39 AM   #11
Feedback Score: 0 reviews
Join Date: May 2011
Location: Wausaukee, Wisconsin
Posts: 27

Made two 10 gallon batches this past weekend, added rice hulls, adjust water to grain ratio and re ordered the sequence for the start of the recirculation. Worked like a dream...... thanks for your help.

biggubba is offline
Reply With Quote Quick reply to this message
Old 10-10-2012, 01:00 PM   #12
Feedback Score: 2 reviews
Join Date: Dec 2010
Location: VA Beach, VA
Posts: 830
Liked 55 Times on 41 Posts
Likes Given: 4


Nobody mentioned mill gap - so I will You may be milling too fine. Recommended gap is 1.5-1.7mm. At this gap you should be left with some barley husks to aid in filtering. You need to be careful not to adjust the water/grist ratio too high.

jcaudill is offline
Reply With Quote Quick reply to this message

Quick Reply
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Recirculation question Brew-ta-sauraus DIY Projects 5 02-28-2012 09:05 PM
Rubbermaid MLT recirculation port? High_Noonan DIY Projects 3 08-17-2011 11:15 PM
Need some help with recirculation setup HossTheGreat DIY Projects 7 08-15-2011 10:03 PM
Bulkhead fitting recirculation port brewnami DIY Projects 6 05-23-2011 01:34 PM
HERMS recirculation kingoslo DIY Projects 11 10-15-2009 06:03 PM