Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   DIY Projects (http://www.homebrewtalk.com/f51/)
-   -   Project "WOODY 3.0XPR" worlds first wooden, adjustable, 3 roller grain mill (http://www.homebrewtalk.com/f51/project-woody-3-0xpr-worlds-first-wooden-adjustable-3-roller-grain-mill-152105/)

bohdan987 12-15-2009 05:06 PM

Project "WOODY 3.0XPR" worlds first wooden, adjustable, 3 roller grain mill
 
5 Attachment(s)

ok, its a work in progress but here is the start.
i needed a grain mill so i desided to make one, after couple sleepless nights i desighn and engineered this beast of the mill. i am looking all over the net and i think that iam FIRST to build a wooden, 3 roller adjastible mill. please corect me if iam wrong!
the bigest chalenge was a desighning and building a adjustment controll because iam working with wood and there is not alot of room so my options are limited. plus i had to figure it out how to turn those monster rollers on my tablesaw.
i made one roller on top stashionery and two other rollers adjast to it.
here are the specs:
rollers.
4.5"/9" made from laminated red oak.
axle.
0.5" steel rod
mill body.
1"/12" maple
adjastment system.
engineered and build by me
drive.
chain and sprocket motor drive
all keep those pictures caming...


bohdan987 12-15-2009 05:06 PM

Project "WOODY 3.0XPR" worlds first wooden, adjustable, 3 roller grain mill
 
5 Attachment(s)

ok, its a work in progress but here is the start.
i needed a grain mill so i desided to make one, after couple sleepless nights i desighn and engineered this beast of the mill. i am looking all over the net and i think that iam FIRST to build a wooden, 3 roller adjastible mill. please corect me if iam wrong!
the bigest chalenge was a desighning and building a adjustment controll because iam working with wood and there is not alot of room so my options are limited. plus i had to figure it out how to turn those monster rollers on my tablesaw.
i made one roller on top stashionery and two other rollers adjast to it.
here are the specs:
rollers.
4.5"/9" made from laminated red oak.
axle.
0.5" steel rod
mill body.
1"/12" maple
adjastment system.
engineered and build by me
drive.
chain and sprocket motor drive
all keep those pictures caming...


bohdan987 12-15-2009 05:06 PM

Project "WOODY 3.0XPR" worlds first wooden, adjustable, 3 roller grain mill
 
5 Attachment(s)

ok, its a work in progress but here is the start.
i needed a grain mill so i desided to make one, after couple sleepless nights i desighn and engineered this beast of the mill. i am looking all over the net and i think that iam FIRST to build a wooden, 3 roller adjastible mill. please corect me if iam wrong!
the bigest chalenge was a desighning and building a adjustment controll because iam working with wood and there is not alot of room so my options are limited. plus i had to figure it out how to turn those monster rollers on my tablesaw.
i made one roller on top stashionery and two other rollers adjast to it.
here are the specs:
rollers.
4.5"/9" made from laminated red oak.
axle.
0.5" steel rod
mill body.
1"/12" maple
adjastment system.
engineered and build by me
drive.
chain and sprocket motor drive
all keep those pictures caming...


bohdan987 12-15-2009 05:06 PM

Project "WOODY 3.0XPR" worlds first wooden, adjustable, 3 roller grain mill
 
5 Attachment(s)

ok, its a work in progress but here is the start.
i needed a grain mill so i desided to make one, after couple sleepless nights i desighn and engineered this beast of the mill. i am looking all over the net and i think that iam FIRST to build a wooden, 3 roller adjastible mill. please corect me if iam wrong!
the bigest chalenge was a desighning and building a adjustment controll because iam working with wood and there is not alot of room so my options are limited. plus i had to figure it out how to turn those monster rollers on my tablesaw.
i made one roller on top stashionery and two other rollers adjast to it.
here are the specs:
rollers.
4.5"/9" made from laminated red oak.
axle.
0.5" steel rod
mill body.
1"/12" maple
adjastment system.
engineered and build by me
drive.
chain and sprocket motor drive
all keep those pictures caming...


bohdan987 12-15-2009 05:06 PM

Project "WOODY 3.0XPR" worlds first wooden, adjustable, 3 roller grain mill
 
5 Attachment(s)

ok, its a work in progress but here is the start.
i needed a grain mill so i desided to make one, after couple sleepless nights i desighn and engineered this beast of the mill. i am looking all over the net and i think that iam FIRST to build a wooden, 3 roller adjastible mill. please corect me if iam wrong!
the bigest chalenge was a desighning and building a adjustment controll because iam working with wood and there is not alot of room so my options are limited. plus i had to figure it out how to turn those monster rollers on my tablesaw.
i made one roller on top stashionery and two other rollers adjast to it.
here are the specs:
rollers.
4.5"/9" made from laminated red oak.
axle.
0.5" steel rod
mill body.
1"/12" maple
adjastment system.
engineered and build by me
drive.
chain and sprocket motor drive
all keep those pictures caming...


bohdan987 12-15-2009 06:10 PM

5 Attachment(s)

i made a jig and used a tablesaw. those rollers are 4.5" and there is no need to knurled them.


bohdan987 12-15-2009 06:10 PM

5 Attachment(s)

i made a jig and used a tablesaw. those rollers are 4.5" and there is no need to knurled them.


bohdan987 12-15-2009 06:10 PM

5 Attachment(s)

i made a jig and used a tablesaw. those rollers are 4.5" and there is no need to knurled them.


bohdan987 12-15-2009 06:10 PM

5 Attachment(s)

i made a jig and used a tablesaw. those rollers are 4.5" and there is no need to knurled them.


bohdan987 12-15-2009 06:10 PM

5 Attachment(s)

i made a jig and used a tablesaw. those rollers are 4.5" and there is no need to knurled them.



All times are GMT. The time now is 01:35 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.